Do I need 135 degree boots or 90 degree, with a big block chevy ?
 

Have headers, but didn't know if bbc's had the wires under the headers or over or what? straight boots seem to want to rub my header tubes..........

On mine i had to get a mix, 6 straight and 2 145's.

------------------
Lutz, Fl
My Team Website
The Heavy Chevy Website
------------------

• 72 Cheyenne 10 LWB GM 12-bolt 3.08 w/ Auburn Posi
  91 454 Edel Intake 850 cfm carb Comp Cam 268/.500 Hedman Headers Dual 3'' Exhaust
• 71 Cheyenne 20 4x4 Fact. A/C PS PB Tilt Currently in the works...
  Put it to the floor...

Depends on the header you are running i'd bet mostly. I got a mix of straight. 30deg and 90 deg. I also found bought a set of sleeves for them cuz i dont want them burning up any more!

------------------
69 Custom 20, 396BB,Longbed fleetside.
New Oak Bed With SS strips... damn nice.

Edelbrock performer RPM-O, Edelbrock 750Carb, Headers, HEI, 2 40" glasspacks.
Stereo: Classic-style tape deck/radio, 2 6x9 Cerwin Vega's in doors, 2 10" Neo subs under seats, 1 900 Watt amp.

SN= Ares220

I put High Temp 90 deg boots on my 427 with headers and so far so good.

------------------
72 GMC 3/4 4X4 350/350
67 Camaro 427/700R4

I have MSD wires on mine and they are straight,but they are slightly bendable,i have 100% no problems,no mix and match.they were about $60

I,m running Dyna-max headers and ready to buy wires. I thought about using 90 deg. boots and running them behind the headers for a neater look. Has anybody seen this done?

I'm running Dynamax with all wires straight in the stock position.

Bill

------------------
72 3/4ton Custom Camper BB,400 Dynamax Cermax headers , air,ps,pb,leafsprings
tilt,3.54 . 82 chevy silverado sb ,ps,pb pw,pd,air 350/350 Flowmaster 40.
Torrance Calif.

" If I knew I was going to live this long I would have taken better care of myself "