|
Brake Hose installation
Hey everyone. I posted this over in the suspension section since I wasn't quite sure were to put it. I'm not getting any responce so I thought I'd try this section. I did a stupid thing this weekend. On my '72 2 wheel drive blazer, I took off both from brake hoses to replace them and now can't remember exactly how the clips that hold them on work. I have one clip, square in shape with a groove cut in it. I know that it slides over one groove in the brake hose by the bracket on the A-arm. At the connection of the hard line and hose. I also have an oval in shape click, short of E-click looking, and this is what I can't seem to figure out or remember. How does it clip on? Anyone have a good picture or diagram of the set up? Thanks.
|
Re: Brake Hose installation
1 Attachment(s)
It's a little blurry, but this is the way mine is.
|
Re: Brake Hose installation
68gmsee - That's perfect! I think I can figure it out with that pic. Got figure out that crazy oval clip. Thanks a bunch.
|
Re: Brake Hose installation
The E-clip goes on one side of the bracket and the square flat clip goes on the other.
|
| All times are GMT -4. The time now is 05:35 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com