The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Need Ideas - Parts Storage (https://67-72chevytrucks.com/vboard/showthread.php?t=311414)

vtblazer 10-21-2008 06:17 AM

Need Ideas - Parts Storage
 
Like a lot of others, I've gathered a sizable pile of old truck parts and almost a dozen parts vehicles - trucks/burbs & blazers.

I've always had this "dream" if I ever had the space, to store truck parts according to their location on our trucks, basically start by stocking the bumper and grill parts on one end and finish up with tail-lights a gates on the other.

Not sure if this would be an 'efficient' way to do it or not.

*So I'm asking for your storage ideas and/or pics.

The garage I'm building will have and attic storage space that's 12ft wide x 8ft high x 22ft long, so yeah, I finally have some room for truck parts.

vtblazer 10-21-2008 06:20 AM

Re: Need Ideas - Parts Storage
 
2 Attachment(s)
Couple pics or reference & proof:

JimKshortstep4x4 10-21-2008 07:52 AM

Re: Need Ideas - Parts Storage
 
Good luck on your storage of parts. Offhand I would suggest that the space is too small!

I stumbled in to a "3 bin" system that does not work well, (parts can be in 1 of 3 places). If I cannot find a part in the three storage locations then I just buy a new one. Like magic I am able to find the part that I needed after buying the part.

I am using two barns, a coup, and two sheds for storage. Currently I am trying to reorganize for the 4th time. The main problem that I run into is what category to put parts into as a typicl vehicle has approximately 12,000 parts.

Good luck!

Jim

special-K 10-21-2008 09:22 AM

Re: Need Ideas - Parts Storage
 
I build shelves and use bins for smaller stuff.I just put things where they fit and if I think I`ll need something sooner I have it more accessible.I have core parts like starters,alts,carbs,compressors,and brackets more to the back along the wall and on narrower shelves.

Brad 10-21-2008 12:19 PM

Re: Need Ideas - Parts Storage
 
I just store parts on my truck! :lol:
http://67-72chevytrucks.com/gallery/...DSC04495-1.jpg

leddzepp 10-21-2008 12:51 PM

Re: Need Ideas - Parts Storage
 
Brad, what size tires are you running, and how much/how did you lower your truck? It sits PERFECTLY.

72BlckButy 10-21-2008 02:36 PM

Re: Need Ideas - Parts Storage
 
Quote:

Originally Posted by leddzepp (Post 2939515)
Brad, what size tires are you running, and how much/how did you lower your truck? It sits PERFECTLY.

leddzepp.... he is running a 4/5 setup. Check out his lime green signature and it has a few things listed about it.

hotrodhomi 10-21-2008 03:46 PM

Re: Need Ideas - Parts Storage
 
If you have a good tailgate, I'll store if for you;)


All times are GMT -4. The time now is 05:00 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com