The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)
-   -   Looking for 71 c20 rear suspension opinions (https://67-72chevytrucks.com/vboard/showthread.php?t=311927)

fattony67 10-24-2008 11:54 PM

Looking for 71 c20 rear suspension opinions
 
I am currently in the process of rebuilding a 1971 long bed fleet side pickup. The truck originally had a camper in the bed, along with monster rear leaf springs. It had 18'' steel wheels with a 31'' outside diameter and still had 10-12'' of clearance in the bed side. During the rebuild I plan to do some modernization. The drive train will be a rebuilt lt1 engine that will be bored and stroked with an edelbrock top end kit. I plan to keep the DANA 60 rear end in order to handle the power from the new engine. I have no interest in lowering the truck other than for improved handling characteristics. My question is this, is there a better alternative to the rear suspension than the standard rear leaf? I have access to a plasma torch and welder, so some fabrication is not out of the question.

Thanks

Tony

BadgerTheFerret 10-26-2008 07:51 PM

Re: Looking for 71 c20 rear suspension opinions
 
I have a 70 C20, and it seems we have the same plans for our trucks. So, Bump for the answer!! :)

leftcoast66 10-26-2008 09:01 PM

Re: Looking for 71 c20 rear suspension opinions
 
I'd think new leaves so that way the steel isn't all old and probably sagging or stuff like that is about it unless you wanna go 4 link like all the big lifted trucks go w/ which for your purposes would be way overkill unless your building it into a trail rig or something.

fattony67 10-28-2008 12:28 AM

Re: Looking for 71 c20 rear suspension opinions
 
I would definitely replace the springs with new. I'm looking for an upgrade to the suspension system for street performance/drag strip. When pushing 500+ horsepower I worry about wheel hop.

Spray-Bomb 10-28-2008 02:44 PM

Re: Looking for 71 c20 rear suspension opinions
 
If youre worried about wheel hop, just convert it to trailing arm suspension out of another 67-72

Kontrol Phreaks 10-28-2008 04:46 PM

Re: Looking for 71 c20 rear suspension opinions
 
PM me and I can provide you with usefull suspension ideas and information that can not be posted here.

Liz 10-28-2008 11:05 PM

Re: Looking for 71 c20 rear suspension opinions
 
Quote:

Originally Posted by Kontrol Phreaks (Post 2949727)
PM me and I can provide you with usefull suspension ideas and information that can not be posted here.

:rolleyes: You were asked not to advertise without a vendor subscription, not asked to never speak in a post again. If you feel you can not deal with the site rules, then by all means log out. Your attitude to staff and now in posts is not warrented nor appreciated.
Thanks

redsled04 10-28-2008 11:41 PM

Re: Looking for 71 c20 rear suspension opinions
 
Quote:

Originally Posted by Kontrol Phreaks (Post 2949727)
PM me and I can provide you with usefull suspension ideas and information that can not be posted here.

If I pm you.Can you give me some info on some Dickie's.:ito:


All times are GMT -4. The time now is 12:31 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com