Trans transplant guys
 

What are you using for shifters? I have swapped in a 4L80e into a 3 OTT manual truck.

I was thinking this:

http://store.summitracing.com/partde...5&autoview=sku

Thanks!

Re: Trans transplant guys
 

with a shifter length of less than 6inches its going to b on the floor for sure// take a 6inch peice of rod and see how you'd have to hunch over to shift //i've had great luck with lokar hard to beat thier classisc looks and quality is second to none

Re: Trans transplant guys
 

I will have to look into that. The unit I posted is the only one that came up on Summit's site with the cable option for a 4L80e. Where can I find these Lokar units?

Re: Trans transplant guys
 

why are you set on cable operated?
http://www.dreamershotrods.com/lok-ats64l80a.aspx

Re: Trans transplant guys
 

I'll be using a lokar column shifter set up that is cable operated. It would probably be easiest for you if you switched to a auto steering column.

On my GMC I used a B&M MegaTruck shifter.

Re: Trans transplant guys
 

I roll with a 16" lokar floor mount hooked to a 700R4 :D

http://67-72chevytrucks.com/vboard/a...1&d=1210900762

Re: Trans transplant guys
 

I'm not, it is just what it came with so I was just thinking about staying the same. no reason at all really.

Re: Trans transplant guys
 

Me likie!

Re: Trans transplant guys
 

I kind of like the B&M Megashifter for strength and ease of install. I have it in my two trucks and my son's truck.