Project "Nympho"
 

Just wanted to say whats up to everyone...and share my frame on the pavement....

Re: 72 SWB layin frame
 

:welcome2: to the board from Mid-MO!!!

So what are you plans for the build?

Re: 72 SWB layin frame
 

welcome to the board. you are just up 287 from me.

Re: 72 SWB layin frame
 

Plans are for full air ride-sd notch out back on the factory two link with blocks...this was a lwb truck i was putting together but for safety's sake I wanted a decent swb frame to work with so now the fun starts! I've already done a lot of paint work and stuff but i'd like to finish this thing out by summer. This is where I was at with the project when I decided to go with this new frame....

Re: 72 SWB layin frame
 

http://i81.photobucket.com/albums/j2...s/welcome2.gif

You should check out the Texas CGITC section :D

http://67-72chevytrucks.com/vboard/f...play.php?f=132

Re: 72 SWB layin frame
 

Welcome to the board.

What color blue is that? (It looks familiar);)

Re: 72 SWB layin frame
 

Welcome Mansfield isn't too far from me. Check out this guy for any custom work. Hes in Mansfield and he's a badass.http://www.nfamusairsuspension.com/page4.htm

Re: 72 SWB layin frame
 

Color is PB5.....
And yes, that guys work looks tight but I like to build then drive....never pay to play!

Re: 72 SWB layin frame
 

By chance, do any of you guys know a good sand-media blaster near mansfield or fort worth? I'm tired of trying to bust off this concrete like crap!

Re: 72 SWB layin frame
 

Hey looks like you got your lowering parts from the same place I did:lol:

Re: 72 SWB layin frame
 

PB5, eeeyyy

I believe that's a Chrysler color. My truck is painted a Chrysler blue as well.;)

Re: 72 SWB layin frame
 

HAHA-yeah we obviously shop the same! And yes PB5 is the electric blue from chrysler-I picked it because of the pearl and it was an easy mix....181 grams of fine satin i believe! I found a sand blaster in mansfield, talked to him today..he is going to clean my crap up on monday for cheap.....the frame is painted and under the cab! I will post pics as soon as it warms up enough to walk outta the door! I'm thinkin about moving this thread to a build thread, what do you guys think?

Re: 72 SWB layin frame
 

Yes ,I would move this one, or start a build thread.

Re: 72 SWB layin frame
 

This is where I will be taking my frame. I hear they are very reasonable.
http://www.outlawpowdercoating.com/

Re: Project "Nympho"
 

Moved to Projects for ya!

Re: Project "Nympho"
 

Good luck with the build.

Re: Project "Nympho"
 

Thanks everyone for the support, I'm on hold for now until I can find a lower control arm, apparently mine in trashed from years of abuse....so now I'm on the parts hunt..if anyone knows where I can pick one up cheap-close to free is great-hit me up...Thanks...also I'll post pics up of the frame tomorrow!

Re: Project "Nympho"
 

There's some wrecking yards here locally that I've bougt control arms from, for as cheap as 40$ a piece. They even pulled them for me so I didn't have to get dirty.

Re: Project "Nympho"
 

Looks like another member is going to sell me a set of upper and lowers already blasted for cheap! And he's local! I love this damn place!

Re: Project "Nympho"
 

you can also try steelco in Waxahachie. they sandblast/powdercoat. 972.923.3603

Re: Project "Nympho"
 

Ok, so a lil update on the truck....I've been working pretty hard on getting it back together and this is where i'm at. I still need to do A LOT! As money comes, I will keep moving foward, however I have a ton of cleaning to do...years and years of dirt= concrete on everything!

Re: Project "Nympho"
 

Made a lil progress today, finally got it rollin again, but def need to clean and paint the RF control arm. Steering box and rod are cleaned and painted-ill prob post pics of that tomorrow...

Re: Project "Nympho"
 

:metal:I can't believe its already been another month since i've posted. Fuel cell is mounted and motor is running again! I've been working a lot on the wiring lately, someone has previously hacked it up pretty good! I will take some pics next time the truck is outside...but for now...here's my 05!

Just kidding, can't get anything to upload, I will resize and retry...laterz:metal:

Re: Project "Nympho"
 

SD notch is in and the back is pretty much done, added some 20's to the mix, and I am going to make a new track-bar but this one is functional for now....also doing some shaving...side markers and third brake light gotta go!

Re: Project "Nympho"
 

More progress pics...feel free to comment or ask ?'s.....later!