The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   spring length (https://67-72chevytrucks.com/vboard/showthread.php?t=317497)

turbotank 12-03-2008 05:51 PM

spring length
 
I have two questions, is the 3/4 ton springs the same length as the 1/2 ton springs?


What is the trick to getting the front bolt out on the springs,how do you get a wrench in there?

Captkaos 12-03-2008 07:49 PM

Re: spring length
 
No 3/4T springs are longer than standard 1/2T springs. They are the same as HD springs on a 1/2T though.

IF the bed is on the truck, it will be an experience, but it can be done.

turbotank 12-03-2008 10:04 PM

Re: spring length
 
so would you have to move the spring hangers to get the 3/4 ton springs to work in a 1/2 ton suburban?

tgh117 12-03-2008 10:14 PM

Re: spring length
 
Since I just took all the springs off my truck I have just been in the same experience. I took a sawzall and cut both sides of the bolt from underneath the spring hanger. Was the only way I was going to be able to get it apart. I didn't care that much because I was swapping all new springs in, so I just wanted them out of the way.

Also, I don't know the length difference between the springs, but if they are fairly close you may be able to take up a little extra length with just the rear shackles, but again I don't know what the difference is.

Good luck with your swap.

turbotank 12-03-2008 10:59 PM

Re: spring length
 
No,don't really wanna cut em off,no money to replace!

Captkaos 12-04-2008 03:29 PM

Re: spring length
 
Don't quote me on this, but all of the Suburbans I have owned and seen came with the 3/4T springs. They are 56" long (30" from the bolt to spring eye). Might measure yours to verify.

turbotank 12-04-2008 04:50 PM

Re: spring length
 
They might come with the hd springs,but just with a visual comparison,I can tell you that there are about two or three springs less on the suburban.I think that I am going to keep them though,cause most of my weight will be a on a trailer,it being a suburban,to only the tongue weight should come into play,and I want it to still ride nice.

Pyrotechnic 12-05-2008 05:54 PM

Re: spring length
 
How many leafs are on these Suburban rear springs ?

Reason I ask is, I have the HD springs on my truck. It originally had 8 leafs with a HUGE helper spring and the ride was awful. I pulled identical leafs out on each side but the end result was not equal.

If these Suburban springs are softer than the 3/4 ton springs, they might be good for trucks with HD springs that need a softer spring.

turbotank 12-07-2008 02:03 PM

Re: spring length
 
Yeah I think they only have like 5 leaves in them,but I will check for you when I get a chance.


All times are GMT -4. The time now is 07:52 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com