Help Please
 

I'm way new to this so any help or comments appreciated.

I have some 5813 air-lift bags that were given to me. I "THINK" what

I want to do is install them in the stock spring location as I've seen

on other threads. But my bags don't have a center bolt hole to attach

through the stock hole in the arms. Do I need to fab something get new

bags or ? This truck is a 69 long fleet by the way. Also I "THINK" I need

the CPP C notch and Center crossmember. I have the adjustable locater.

Does the frame bracket need to be modified ? With this set-up how much

drop can I expect for just toolin around and not banging the axle into the

frame ? What about the front ? How much drop to match the rear and

maintain ride quality ? Oh yea, what pinion angle do I need ?

Told you I was ignorant.

Any help is appreciated.

Re: Help Please
 

im not to sure what that part number means. you know if they are 2500, 2600, sleeve style bags?

Re: Help Please
 

Well since I asked this question I've received another set of bags.

These are Firestone 224c and they have a hole in the center on

one end. It's nice to have freinds. I still need some answers and

education.

Re: Help Please
 

The 5813 is a 2500# bag.
I make a bracket that has flush mounted hardware and a long stud to drop in the t/a.
If you want to ride low, install a notch, your neck/and back will love it.
If you run drop spindles and bags depending on your tire height it will darn near lay out, and get a good low ride quality.
We stock most parts LMK if I can help