The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Wheel/Tire Size (https://67-72chevytrucks.com/vboard/showthread.php?t=319302)

Hawker7 12-15-2008 02:26 PM

Wheel/Tire Size
 
I'm thinking of getting 15x8, 4.25 backspace Cragar's for my 72 C-10 long bed, and would like to run 275/60/15’s all around. Will these fit OK? Anyone know if they will stick out past the wheel wells? Also, I would like to get a 2/4drop at some time down the road. Will this setup also work with that drop?

Tx Firefighter 12-15-2008 02:45 PM

Re: Wheel/Tire Size
 
You'll be fine.

Here is my old truck with 15x8 and 4.25 bs on all 4 corners.

http://i276.photobucket.com/albums/k...es/Img3769.jpg
http://i276.photobucket.com/albums/k...es/Img3772.jpg

Lowered 4/6

275/60 on back
245/60 on front.

If you ran only a 2 inch drop on the front, I think your 275s would clear. The tires will clear on the back no sweat regardless of the drop.

Already Gone 12-15-2008 06:22 PM

Re: Wheel/Tire Size
 
ttt

Hawker7 12-15-2008 06:28 PM

Re: Wheel/Tire Size
 
wow, that 275 tire looks bigger than I thought. Does anyone else have any pics of this size tire on our trucks?

suttoncurt 12-16-2008 11:03 PM

Re: Wheel/Tire Size
 
2 Attachment(s)
Attachment 412785


Attachment 412786
Here's my truck . I have 15x8.5 tt2's with 275-60-15 firestone indy 500 tires on all four corners . I have (about) 3'' / 5'' lowering kit on this truck . As you can see theres plenty of room and they have never rubbed . The offset is 4.25/4.25 i think . I ordered these out of summit racing catalog and they knew what it needed. Good Luck . Buying a set of wheels that dont fit or look bad sucks . I had a bad experence with a new set of 20'' being the wrong offset and dont want you to go through that . good luck - curt

suttoncurt 12-16-2008 11:11 PM

Re: Wheel/Tire Size
 
1 Attachment(s)
Attachment 412791
This pict shows the fender well better the shadow of the other pict makes it hard to tell where the tire stops and the inner fender begins . I know this setup will work for your truck . curt

Pillow 12-17-2008 12:51 AM

Re: Wheel/Tire Size
 
TX those old school Cragars look good! Very period correct.

Hawker7 12-19-2008 05:30 PM

Re: Wheel/Tire Size
 
Quote:

Originally Posted by suttoncurt (Post 3031840)
Attachment 412785


Attachment 412786
Here's my truck . I have 15x8.5 tt2's with 275-60-15 firestone indy 500 tires on all four corners . I have (about) 3'' / 5'' lowering kit on this truck . As you can see theres plenty of room and they have never rubbed . The offset is 4.25/4.25 i think . I ordered these out of summit racing catalog and they knew what it needed. Good Luck . Buying a set of wheels that dont fit or look bad sucks . I had a bad experence with a new set of 20'' being the wrong offset and dont want you to go through that . good luck - curt

Did you have to custom order the wheels? I thought tt2's come with a 3.75 backspace? I think those are the wheels combo I'm going to go with.

suttoncurt 12-20-2008 12:02 PM

Re: Wheel/Tire Size
 
No , these wheels were not special order . There were ordered out of the summit racing catalog. Wish i was home i would measure for you but im 8 hours from home right now.


All times are GMT -4. The time now is 06:52 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com