help
 

mabey somebody can help. i am having trouble getting ball joints to let go. i have use all three sizes of forks, tried everything i got. ive done this a hundred times never this hard. help

Re: help
 

soak it with some pb blaster and hit it harder. o try heating the spindle were the ball joint goes in with a torch to expand the metal and try.

Re: help
 

do not let the suspension droop out. jack the suspension up a little and hit the spingle at the point where the ball joint is at. there is usually a flat spot on the spindle. trust me it works. having the suspension at full droop sometimes puts the ball joint in a bind.

Re: help
 

if all that dont work go to a local hardware store and get a 12lb sledge hammer. that will work. haha.