The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 1 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - Wtb (https://67-72chevytrucks.com/vboard/showthread.php?t=322180)

Hart_Rod

01-04-2009 05:00 PM

Wtb

3 Attachment(s)

buddy bucket driver side seat adjusters. Let me know what you got.

R/

Hart_Rod

01-05-2009 10:39 AM

Re: Wtb

ttt

Hart_Rod

01-06-2009 11:19 AM

Re: Wtb

ttt

Hart_Rod

01-10-2009 01:46 AM

Re: Wtb

bttt

72ironmike

01-10-2009 06:46 AM

Re: Wtb

Rob, What would something like that be worth?

Hart_Rod

01-10-2009 12:26 PM

Re: Wtb

Quote:

Originally Posted by 72ironmike (Post 3077335)

Rob, What would something like that be worth?

Do you have a complete set? How much do you want for them?

72ironmike

01-10-2009 02:53 PM

Re: Wtb

Yes I do have some extras. Haven't thought about selling though. Was curious as to value.

Hart_Rod

01-10-2009 03:36 PM

Re: Wtb

Quote:

Originally Posted by 72ironmike (Post 3077842)

Yes I do have some extras. Haven't thought about selling though. Was curious as to value.

I haven't seen any listed on here. I only need the side with the handle. I would be willing to do a little trading since I have 2 of the non-handle slides. Let me know what you think.

Rob

72ironmike

01-10-2009 06:38 PM

Re: Wtb

Rob, I should probably hold on to what I got for right now. I'm going to look at some buddy bucket pieces next week and will just keep collecting parts until I can build another set. Good luck & TTT for ya.

Hart_Rod

01-10-2009 08:47 PM

Re: Wtb

Quote:

Originally Posted by 72ironmike (Post 3078134)

No worries Mike. After further review (:)), I figured out that I have a left and right track, but the handle is broken off of the left track. Do you have a spare one of those laying around........:D.

72ironmike

01-10-2009 09:46 PM

Re: Wtb

No spare handle but I too have an extra track with the handle broke off? What's up with that?

breeh

01-11-2009 12:27 AM

Re: Wtb

Good luck finding that! After 2 years of looking, I finally purchased a whole buddy bucket seat setup just for the sliders! The set that I had redone did not have sliders at all :dohh:

too much stuff

01-11-2009 12:28 AM

Re: Wtb

Also curious what these are worth? I know they are tough to find. I pulled a set of buckets out of a 68 one ton that had the buddy part cut out and different brackets made by the installer i would imagine. I will have to see what is there.

Hart_Rod

01-11-2009 12:29 AM

Re: Wtb

Quote:

Originally Posted by 72ironmike (Post 3078567)

No spare handle but I too have an extra track with the handle broke off? What's up with that?

Maybe I'll just make one. They look pretty simple....

Quote:

Originally Posted by breeh (Post 3078920)

Good luck finding that! After 2 years of looking, I finally purchased a whole buddy bucket seat setup just for the sliders! The set that I had redone did not have sliders at all :dohh:

Someone had a set on here in the last couple of months but I didn't buy them.......:(.

Hart_Rod

01-11-2009 12:44 AM

Re: Wtb

Quote:

Originally Posted by too much stuff (Post 3078928)

The seat bracket is pretty easy to fix using 1" conduit. You can usually find a center seat for less than a $100. Now the slides, that's a different story..........

too much stuff

01-11-2009 12:51 AM

Re: Wtb

I found another frame, it was the adjusters i was wondering about. Sorry for the confusion about the center part. Now are ya confused???

Hart_Rod

01-11-2009 12:56 AM

Re: Wtb

Quote:

Originally Posted by too much stuff (Post 3078974)

I found another frame, it was the adjusters i was wondering about. Sorry for the confusion about the center part. Now are ya confused???

:lol:, I see what you're saying. You'll only need the driver side. The passenger side just sets stationary on a set of Z brackets. It would be nice if we could find a set of adjusters off of something else that would work....

breeh

01-11-2009 01:42 AM

Re: Wtb

Somebody on the board suggested these to me. He said that they worked fine. I cannot speak to it myself though.

http://store.summitracing.com/partde...5&autoview=sku

too much stuff

01-11-2009 09:20 PM

Re: Wtb

Hey rob, can you give me a few measurements on the one pictured? Center of the bolts, and how long the whole part is and the adjusting arm length? Thinking here...

Hart_Rod

01-11-2009 09:34 PM

Re: Wtb

2 Attachment(s)

Quote:

Originally Posted by too much stuff (Post 3080601)

Hey rob, can you give me a few measurements on the one pictured? Center of the bolts, and how long the whole part is and the adjusting arm length? Thinking here...

Here you go.

Hart_Rod

01-16-2009 12:48 PM

Re: Wtb

ttt

Hart_Rod

01-18-2009 12:15 PM

Re: Wtb

ttt

blazer72

01-21-2009 11:40 PM

Re: Wtb

Call Kenny's Trucks in Mounds OK, he's got a crapload of them

Hart_Rod

02-20-2009 11:23 AM

Re: Wtb

Quote:

Originally Posted by blazer72 (Post 3100733)

Call Kenny's Trucks in Mounds OK, he's got a crapload of them

Thanks. You got a number?

my67chevytruck

02-20-2009 02:17 PM

Re: Wtb

http://www.kennystrucks.com/

All times are GMT -4. The time now is 06:57 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page