The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Power Steering Question?????????? (https://67-72chevytrucks.com/vboard/showthread.php?t=322611)

El Jay 01-07-2009 12:27 AM

Power Steering Question??????????
 
I have/had a problem with the power steering bracket on my '72 3/4 T, with a factory 402 BB.

The bracket for the power steering pump is "bent" so the belt is "out of alignment." I can stand at the left fender and look across the belts & pulleys & see that things aren't lined up. (This is the factory set up)
So as a result, it flings belts like there is no tomorrow.
I finally got tired of replacing belts & just put a "necker/suicide" knob on the steering wheel.

A friend of mine gave me the P/S pump & bracket assembly from a 454 he's putting in his Studebaker PU.

Here's the question/problem: I have 1 friend that says everything will work; 1 that says it might work; and 1 that says it won't work.
Please bear in mind, none of these folks are "youngsters" and have been involved with trucks & cars forever. (the youngest is in his mid-50's; the eldest, mid-70's)

Any input would be appreciated.

Sorry for the long post, but I wanted to give as much detail as possible.

Thanx,
El Jay

P.S. Somebody else told me to just run the P/S belt "loose" so it doesn't get tossed off.

Livrat 01-07-2009 01:05 AM

Re: Power Steering Question??????????
 
All 454's came from the factory with a "long" water pump set up (alternator on the passenger side) and your 402 came equipped with a "short" water pump setup.. (alternator on the drivers side)..
You can change everything on the front of the engine (Water pump, all pulleys and brackets) then extend the alternator wiring and make it work.. But just using the 454 PS pump and bracket will not work..

El Jay 01-07-2009 01:30 AM

Re: Power Steering Question??????????
 
Quote:

Originally Posted by Livrat (Post 3071317)
All 454's came from the factory with a "long" water pump set up (alternator on the passenger side) and your 402 came equipped with a "short" water pump setup.. (alternator on the drivers side)..
You can change everything on the front of the engine (Water pump, all pulleys and brackets) then extend the alternator wiring and make it work.. But just using the 454 PS pump and bracket will not work..

That's exactly the kind of info I was looking for.
Thanks a ton.

I don't really need to be replacing the "whole front of the engine!"

El Jay

Jerry Jones 01-07-2009 01:49 AM

Re: Power Steering Question??????????
 
I must ask, what did Bud say?

El Jay 01-07-2009 01:59 AM

Re: Power Steering Question??????????
 
Quote:

Originally Posted by Jerry Jones (Post 3071397)
I must ask, what did Bud say?

NO!
He can get what I need shipped up from SoCal.

Jerry Jones 01-07-2009 02:02 AM

Re: Power Steering Question??????????
 
Tim to the rescue?

El Jay 01-07-2009 02:15 AM

Re: Power Steering Question??????????
 
Yup, I think.
I get all the names cornfused.

Bud, Steve(?), David, & I are going to the Turlock Swap meet, on the 24th, weather permitting.
We'll be cruising in Shirley's car, Wanna join us?

Jerry Jones 01-07-2009 02:33 AM

Re: Power Steering Question??????????
 
I will have to see if'n Mr Hall is back yet.

El Jay 01-07-2009 03:21 AM

Re: Power Steering Question??????????
 
Well, is he?
Inquiring minds want to know.


All times are GMT -4. The time now is 03:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com