The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - need tilt coloum measurements (https://67-72chevytrucks.com/vboard/showthread.php?t=325007)

Johns70

01-21-2009 08:26 PM

need tilt coloum measurements

i picked up a van tilt and have it tore down to shorten it up to the trucks mesurenents.does any one have them for the main shaft and the hole opening mesurement for the main tube and inner shift tube for neutral saftey switch? any help would be appreciated thanks john

john	01-21-2009 08:30 PM

Re: need tilt coloum measurements

This should get you going. good luck.
http://67-72chevytrucks.com/vboard/s...d.php?t=147927

Johns70

01-21-2009 08:54 PM

Re: need tilt coloum measurements

thanks that what i was looking for. been awhile since ive been on the board didnt know that was on faqs. thanks again

All times are GMT -4. The time now is 12:17 PM.