|
Post pictures of your mufflers and exhaust system
I ordered my Spintech mufflers & X-pipe from Spintech.
I went by my original glass packs clearance to determine if they would work. But decided to go ahead and ask what all you've done to make sure I didn't screw up. ;) (mainly to get some really cool ideas :lol:) s/t |
Re: Post pictures of your mufflers and exhaust system
Heddman long tube headers, to 2-1/4 duals, they come up into the frame rails after the crossmember, Turbo mufflers are tucked in close to the springs, and it dumps over the axle. Came with the truck, but sounds mean as hell.
|
Re: Post pictures of your mufflers and exhaust system
You made me think I almost oversized my pipes! I ordered 2.5in, and after a quick check here I found it's what is recommended. :uhmk: dodged a bullet there. lol
s/t |
Re: Post pictures of your mufflers and exhaust system
Can't help you much my 292 was running straight pipe from the manifold back as the muffler had fallen off. Sounded mean kind of like a prop plane taking off.
|
Re: Post pictures of your mufflers and exhaust system
Quote:
My truck gets enough flow from the tail pipes to blow leaves around that are 5-10 feet from the rear bumper, and it dumps at the axle. :lol: |
Re: Post pictures of your mufflers and exhaust system
i have spin techs on my truck and love them ..i have a x pipe to install later .2 1/2 inch coming out in front of the rear tires ....ran it thru the center crossmember.i have long headers on it now so i couldnt tuck it up to much at the collector.will try to take some pics tom if i can get home before dark
|
Re: Post pictures of your mufflers and exhaust system
do you guys have any video or sound clips of your exhaust i would like to hear it
|
Re: Post pictures of your mufflers and exhaust system
Even meaner in person. Youtube and my cam don't translate well. |
Re: Post pictures of your mufflers and exhaust system
it still sounds good does it roar in the cab going down the road i like it
|
Re: Post pictures of your mufflers and exhaust system
Couldn't tell you, haven't driven it besides up and down the driveay while moving it around. If it wasn't for CPP's lazy ass shipping methods I would have it on the road this weekend.
At idle it's very deep in the cab, but when holding the revs at about cruising speed it's got a nice throaty tone with out droning like flow masters. It has a mean bark when you wail on the throttle. Trust me, I can't wait to get on an open road and let that 4bbl go wide open :metal: |
Re: Post pictures of your mufflers and exhaust system
2.5 inch with X pipe out to the bumper. Running Cherry Bomb Extreme muffs. Scares the old ladies on the side walk :D
http://i62.photobucket.com/albums/h1...k/DSC04713.jpg http://i62.photobucket.com/albums/h1...k/DSC04712.jpg http://i62.photobucket.com/albums/h1...k/DSC04709.jpg http://i62.photobucket.com/albums/h1...ment-9aspx.jpg |
Re: Post pictures of your mufflers and exhaust system
I am running a Dr gas (same guy who designed the spin tech) 3" x-pipe with 3 inch Dynomax Super Turbos. I will post a picture and sound clip a little later.
|
Re: Post pictures of your mufflers and exhaust system
Here's a sound clip that I really dig with the spintechs.
|
Re: Post pictures of your mufflers and exhaust system
Here is one of mine on the dyno, guy couldnt get her to hook up :devil: sorry for the sound/pic quality its just a digital. 3" straight to 1chamber flowmasters dumped
|
Re: Post pictures of your mufflers and exhaust system
here is a link (that i hope works) to a video of mine.
I have Jeg's long tube headers and a complete Stainless steel Magna-flow system with 2.5", x-pipe, polished mufflers, and behind the rear tire exits. |
Re: Post pictures of your mufflers and exhaust system
I just got this link from another thread. It real similar to how mine are now, and I plan on doing it like this one.
My concern is the muffler location on a lowered truck. Is this how you have them on a lowered truck? http://www.factorymuscle.net/cars/ca...p?id_car=55722 s/t |
Re: Post pictures of your mufflers and exhaust system
That's how mine are ran. The only thing I did was turn the muffler on there sides for more clearance since it was lowered. I want to redo mine and run them through the rear support at some point and time.
|
Re: Post pictures of your mufflers and exhaust system
Mine sit right next to the springs over the trailing arms. Just have to tweak it so that it doesn't bounce off the muffler any more.
Plenty of clearence over the axle though. I'd have to start digging into the bump stops before I hit the pipes |
Re: Post pictures of your mufflers and exhaust system
this is mine, it's lound pretty much all the time but it's not poppy like the 2 inch stuff is
http://i136.photobucket.com/albums/q...4/HPIM0598.jpg http://i136.photobucket.com/albums/q...4/HPIM0592.jpg |
Re: Post pictures of your mufflers and exhaust system
Quote:
s/t |
Re: Post pictures of your mufflers and exhaust system
Quote:
|
Re: Post pictures of your mufflers and exhaust system
They all sound great,but cadiman67 yours sounded awsome to me.i'm over here in jacksonville.
|
Re: Post pictures of your mufflers and exhaust system
thanks kurt,
we'll have to meet up some time, Jax isn't too far. Adam |
Re: Post pictures of your mufflers and exhaust system
2 Attachment(s)
Tallahassee, fl here (sorry to mini-jack this thread), My truck is way down and I need an exhaust system that is really gonna tuck, any ideas?
she's low Attachment 427420 Attachment 427422 thanks for all the help. and again, sorry to jack the thread!:uhmk: |
Re: Post pictures of your mufflers and exhaust system
1 Attachment(s)
Here's mine...2.5" exhaust, h pipe, 40 series flow masters= LOUD!!!!:metal:
|
| All times are GMT -4. The time now is 10:55 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com