The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)

- - 4WD Selector Lever Light Replacement? (https://67-72chevytrucks.com/vboard/showthread.php?t=326151)

GG_Blaisdell

01-29-2009 03:19 PM

4WD Selector Lever Light Replacement?

Hello folks,

I have recently discovered the light/bulb that illuminates my transfer case selector, or 4wd lever inside the cab on the floor (i.e. 2 wheel hi, 4 wheel low etc.) has ceased burning. Any tips on replacing said bulb? I remember it functioning but there is no bulb visible inside the little plastic window.

The truck is an '87 K5 350.

Thank you for any help or information!

Jonboy

01-29-2009 10:56 PM

Re: 4WD Selector Lever Light Replacement?

there are 2 screws in the front and 2 in the rear of the black console. Remove them, and lift up. You will see the wiring and the bulb.

GG_Blaisdell

01-30-2009 07:31 PM

Re: 4WD Selector Lever Light Replacement?

Thank you Jonboy. Took care of the bulb this morning, bulb no. 194, pack of two cost $2.59 at NAPA. Thanks again.

All times are GMT -4. The time now is 02:13 AM.