The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Square Door Hinge Bolt (https://67-72chevytrucks.com/vboard/showthread.php?t=327987)

BruthaMan 02-09-2009 08:28 PM

Square Door Hinge Bolt
 
On the top door hinge, there's one odd nut that is square. Is that welded to the hinge and the bolt is on the inside, or does that square bolt actually come off?

I haven't had any success getting past it and need to get the hinges off. Any advice greatly appreciated, thanks!

old Rusty C10 02-09-2009 08:36 PM

Re: Square Door Hinge Bolt
 
That is actually a welded nut on the hinge you need to go inside the cab and unwrench the bolt that comes through the cab and into the hinge

BruthaMan 02-09-2009 09:09 PM

Re: Square Door Hinge Bolt
 
Many thanks, Bob!

heavychevy79 02-10-2009 02:16 AM

Re: Square Door Hinge Bolt
 
That's the only F%rd part of the truck. lol

Tape your socket onto the extention because I know of no magnet that will
get something out of a place like that.
I haven't droped one in there before but I can imagen hearing it roll around in there while driving.:hh:

Trucks with no dome light have a metal plug you'll pop out with a screwdriver.
Trucks with a dome light have a rubber plug with a wire going through it that you can pull out with your fingers.


All times are GMT -4. The time now is 01:53 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com