motor mounts
 

looking for some advice on the best way to mount my 632 its in a 70 short box thanks

Re: motor mounts
 

A motor plate would probably be the easiest and cleanest way.

Re: motor mounts
 

do you know where i can find some pics on all to mount it to the frame thanks

Re: motor mounts
 

You need motor plates or at least a mid plate . That thing has alot of torque so you dont really want to hold it down with just the bosses on the block that could damage the block . You need to get a piece of 3/16" aluminium plate for the front and carve it out to fit . Then use some 1/8" steel on the frame rails to bolt it to . I would use TCI's mid plate / flexplate shield in the middle . They come oversise and are easy to fit . On the trans mount use a quality rubber mount . The tranny needs to be able to move a little to avoid breaking the case . You can click on my link but you might not be able to see much . I'm sure Kevins build thread would give you some idea of how to do it .

Re: motor mounts
 

here a few I dug up for you.

Re: motor mounts
 

Motor looks great. Thing ought to be a beast.

Re: motor mounts
 

that's the old one stay tuned for the new bullet!

Re: motor mounts
 

Haha "Bullet"... More like Bazooka

Re: motor mounts
 

thanks for some ideas