67 1/2 ton power steering complete
 

I removed this from a wrecked truck last May. It was working great when removed.the lines have never been separated from the pump or cylinder.it is complete from tie rod end to tie rod end.Has frame bracket and line clamp to steering box.Everything pictured is included pump and all.This is from a half ton truck 2wd. 350.00 plus shipping
Please respond to post
Thanks greg

Re: 67 1/2 ton power steering complete
 

ttt

Re: 67 1/2 ton power steering complete
 

Do you know if this will work on a 1969 C-10 with the 292 six cylinder? If so how much for shipping to Indianapolis, IN 46250

Re: 67 1/2 ton power steering complete
 

69 C-10 CsT As far as know the setup will work with your truck.but the power steering pump has a small block bracket you would need the six cylinder bracket.Also your 69 should have a reinforced frame.Which will work with the power steering box.this setup was used in 67 without the reinforced frame
i believe the shipping would 45 dollars
thanks greg

Re: 67 1/2 ton power steering complete
 

how about 300 shipped
greg

Re: 67 1/2 ton power steering complete
 

Clean 67, that sounds better. I have my eye on a few on eBay. I want to see how much they go for, but I am interested in your set up.

Re: 67 1/2 ton power steering complete
 

ttt

Re: 67 1/2 ton power steering complete
 

No need to discount this fine gem of a unit.It`s the rare Corvette option(kinda really is:cool:)