The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Seat belt Help! Kid on the way, need better belts!!! (https://67-72chevytrucks.com/vboard/showthread.php?t=329214)

bird7263 02-16-2009 10:27 PM

Seat belt Help! Kid on the way, need better belts!!!
 
Ok guys, I know that I am touching on a subject that has been brought up several time.. I am looking to put new seat belts in the 66. I have two cheezy belts in there now that are not stock. I really want to find a belt that self retracts on the sides.. Any body ever bought belts out of another rig or car and used them in there 60-66. I am looking for ideas.. And pics would be great..

I don't want to have to switch over to lap and should if I don't have too.. I just want Mamma and Jr to ride all summer with me to the car shows and have nice belts... Thanks guys

texanidiot25 02-16-2009 10:31 PM

Re: Seat belt Help! Kid on the way, need better belts!!!
 
If you guys have the bolt hole in the B-pillar of the cab like the 67-72s, the 1st gen S10 belts work really well.

Chevy Fleetside 02-16-2009 11:22 PM

Re: Seat belt Help! Kid on the way, need better belts!!!
 
2 Attachment(s)
These are the belts that are in my truck. Luca used to sit in the middle facing me. He was 6 months in this picture and if you look next to him you can see the base for his car seat. Just a lap belt.

mateo1279 02-20-2009 02:11 PM

Re: Seat belt Help! Kid on the way, need better belts!!!
 
When my kiddo was brand-new I had a similar base. The lap belt actually was able to snug down tighter across the bottom piece then my wife's toyota's shoulder belt!
Even with a normal car seat, it tightens down really well with the simple lap belt.

LILRED66 02-20-2009 07:36 PM

Re: Seat belt Help! Kid on the way, need better belts!!!
 
1 Attachment(s)
How about a set of these for factory lap/shoulder belts? I have never seen a set of these in person, however, I now know why so many cabs have the "existing weld nut" on the "B" pillar by your ear.

Big Fenders 02-20-2009 09:12 PM

Re: Seat belt Help! Kid on the way, need better belts!!!
 
Check out www.juliano's.com. They have what ever you need for bench seat or buckets. Retractors also

Woogeroo 02-21-2009 02:44 AM

Re: Seat belt Help! Kid on the way, need better belts!!!
 
I have a set of retractable shoulder belts from juliano's(mentioned above) for a bench seat in my '65 c10 with a bench seat.


I have also read good things about this companies belts from other people with trucks like ours:

http://gemstreetrods.com


-W

ChiefRocka 02-21-2009 09:11 AM

Re: Seat belt Help! Kid on the way, need better belts!!!
 
I put in belts in my truck as well for my kids. I just went to the wrecking yard and pulled the belts from the back-seats of G-bodys (Regal, Cutless, MonteCarlo, etc.)

I install three lap belts in my truck, using 1/4 plate and weld nuts on various locations in the floor...


All times are GMT -4. The time now is 10:05 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com