The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Another "another one followed me home" thread! (https://67-72chevytrucks.com/vboard/showthread.php?t=331905)

msgross 03-04-2009 08:09 PM

Another "another one followed me home" thread!
 
3 Attachment(s)
So the wife is just waiting to say "i told you so" but I went and bought another truck today. This will hopefully turn a little profit and the lady selling it seemed to be having a bad month with a separation an all...

69 C-10, plain jane except for the side molding (only on one side now), V8 still TBD,

The good:
about $700 in newer engine parts on it (new Edelbrock carb, intake, fuel pump plus an MSD coil, wires and box)
new tires, recent PA inspection (don't ask me how that happened),
newer aftermarket tailgate,
new alternator and water pump
clear title
good hood,grille,bed is so so...has plastic liner
brakes work
new cab mounts
floor is solid, one patch a few years ago
new tinted slider
nice seat
$50 box of weatherstripping

The bad:
it's stuck in third gear after her ex husband removed the column shift for a floor shift.
rust above the sun visors and driver door :(
one control arm looks rusted out
oil pan leaking

Plans are to fix the tranny linkage, clean it up a little and flip it. If it doesn't sell by May then she'll get parted.

72 Super 03-04-2009 08:18 PM

Re: Another "another one followed me home" thread!
 
Looks like a good start for a project

msgross 03-04-2009 08:46 PM

Re: Another "another one followed me home" thread!
 
next question is why would it be stuck in third if the linkage isn't the issue? ways to fix?

WIDESIDE72 03-04-2009 10:00 PM

Re: Another "another one followed me home" thread!
 
Hey, I was wondering... Do you think that is a 327 in it? HAHA
(judging from the emblems on the air cleaner and valver covers

72BlckButy 03-04-2009 10:09 PM

Re: Another "another one followed me home" thread!
 
Looks like a nice score... nice buy!

BarryB 03-04-2009 10:40 PM

Re: Another "another one followed me home" thread!
 
probably has the shift forks in a bind. or Could be a syncro broke and jamming the shifter up. I would remove the linkage and start from the trans and work my way thru the shifter.

big_al_71 03-04-2009 10:41 PM

Re: Another "another one followed me home" thread!
 
Hey Mike it looks like it could be a cool driver just a few patches and I would roll in it.

msgross 03-04-2009 11:14 PM

Re: Another "another one followed me home" thread!
 
Quote:

Originally Posted by WIDESIDE72 (Post 3180334)
Hey, I was wondering... Do you think that is a 327 in it? HAHA
(judging from the emblems on the air cleaner and valver covers

I'm still trying to decode the block. I it's a U5 suffix code... what's that?

Quote:

Originally Posted by 72BlckButy (Post 3180355)
Looks like a nice score... nice buy!

Thanks, we'll see if I can get it running...

Quote:

Originally Posted by BarryB (Post 3180438)
probably has the shift forks in a bind. or Could be a syncro broke and jamming the shifter up. I would remove the linkage and start from the trans and work my way thru the shifter.

good advice, i'll be looking into it this weekend. There are a few 3 speeds for sale in my area as well so it might get swapped in the end.

Quote:

Originally Posted by big_al_71 (Post 3180441)
Hey Mike it looks like it could be a cool driver just a few patches and I would roll in it.

This would even make a dump in Miami Big AL! Rust is a bad cancer and this 40 year old mama might not make it another 40...

msgross 03-05-2009 02:42 PM

Re: Another "another one followed me home" thread!
 
1 Attachment(s)
Since this thing has nice tires and rusty rims how do you think these will look for $50?

Gumby'sC20 03-05-2009 03:03 PM

Re: Another "another one followed me home" thread!
 
For $50 you cant beat that. I'd go for it!

special-K 03-05-2009 03:15 PM

Re: Another "another one followed me home" thread!
 
Too bad about her troubles with seperation.How did she look?Oh...looks like a good deal and the slots for $50 is awesome.

BluTrukker 03-05-2009 03:58 PM

Re: Another "another one followed me home" thread!
 
Where did you find those slots for 50$ Is that each or for the set. If you got the whole set for 50$, I'll give you 75 for 'em! Looks like a good project.

my67chevytruck 03-05-2009 04:15 PM

Re: Another "another one followed me home" thread!
 
good looking truck ... fix her up ...

msgross 03-05-2009 05:19 PM

Re: Another "another one followed me home" thread!
 
Quote:

Originally Posted by BluTrukker (Post 3181692)
Where did you find those slots for 50$ Is that each or for the set. If you got the whole set for 50$, I'll give you 75 for 'em! Looks like a good project.

with that "squashed bug" avatar I don't know if I should say!!!!

Guy is going to meet me at lunch tomorrow, $40 if I drive an extra 15 miles to his place to pick them up. That's for all four.


Special-K, want me to fix you up? She has three kids and an ex that doesn't pay support. it is a sad story...

my67chevytruck 03-05-2009 05:38 PM

Re: Another "another one followed me home" thread!
 
Its the Special-K KONNECTION :lol:

msgross 03-05-2009 11:23 PM

Re: Another "another one followed me home" thread!
 
I'm picking up the slotted mags tomorrow... can't beat the price...


All times are GMT -4. The time now is 12:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com