The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - '67 3 Speed Parts (https://67-72chevytrucks.com/vboard/showthread.php?t=333462)

Prathbun

03-14-2009 07:31 PM

'67 3 Speed Parts

5 Attachment(s)

I have some extra parts that I need to get rid of. These are all from a 1967 C20, 3 speed, and standard brakes, 283

• Shifter Rods $10
• Motor mounts $5
• Cross member only $10
• 3 speed trans….worked great when I took it out $25
• Bell housing and bolts $10 Sold
• Bell housing dust cover and bolts $10 Sold
• Starter dust guard $10
• Throw out arm $5
• Flywheel $15
• Flywheel bolts $5
• Pressure plate bolts $4
• Clutch and brake pedal assembly, not PB $20

1969 C10 auto cross member support brackets $5

This is how I do business. I’ll ship the items to you for approval and email you with the total cost (which would include shipping costs). I’ll ship via USPS or which ever is cheaper. If you like what I sent you, send me some money. If not, send me the stuff back.

Paypal: oneguysgarage@gmail.com

Thanks

Prathbun

03-14-2009 07:33 PM

Re: '67 3 Speed Parts

3 Attachment(s)

More Pics

Prathbun

03-15-2009 10:26 AM

Re: '67 3 Speed Parts

Thanks for looking!!!

TTT

Cyclone44

03-15-2009 12:38 PM

Re: '67 3 Speed Parts

Can you tell me the condition of the flywheel? Teeth all good? Clutch surface ok? I need it and the starter dust cover and shift rods....Thanks..

Prathbun

03-15-2009 06:49 PM

Re: '67 3 Speed Parts

3 Attachment(s)

Quote:

Originally Posted by Cyclone44 (Post 3198744)

Can you tell me the condition of the flywheel? Teeth all good? Clutch surface ok? I need it and the starter dust cover and shift rods....Thanks..

Thanks for the reply!! Here are some pics of the flywheel. All the teeth look great!!!

Cyclone44

03-15-2009 07:10 PM

Re: '67 3 Speed Parts

I can use that flywheel.....Do you think it will fit in a flat rate box?....Can you give me a price on shipping to 37918? Thanks

Prathbun

03-15-2009 07:55 PM

Re: '67 3 Speed Parts

Quote:

Originally Posted by Cyclone44 (Post 3199386)

I can use that flywheel.....Do you think it will fit in a flat rate box?....Can you give me a price on shipping to 37918? Thanks

Flywheel is too big for flat rate box. Dang!!! That would have been the cheapest!!

PM Sent

faribran

03-15-2009 08:08 PM

Re: '67 3 Speed Parts

i might be interested in the shifter rods.... did they come off of the tranny pictured??

Prathbun

03-15-2009 08:48 PM

Re: '67 3 Speed Parts

Quote:

Originally Posted by faribran (Post 3199520)

i might be interested in the shifter rods.... did they come off of the tranny pictured??

Thanks for the interest in the shifter rods. Yes, they did come off the pictured transmission.

Cyclone44

03-15-2009 08:54 PM

Re: '67 3 Speed Parts

Ok thanks for checking....I will pass...George

Don Brace

07-08-2009 09:51 AM

Re: '67 3 Speed Parts

Do you still have the 3 speed cross member and the spacers?
Thanks
Don Brace MN

Prathbun

07-08-2009 05:00 PM

Re: '67 3 Speed Parts

3 speed cross member and braces are still available.

breeh

07-08-2009 05:08 PM

Re: '67 3 Speed Parts

If the bellhousing dust cover includes both pictured pieces then I will take them. Thx!

Prathbun

07-08-2009 09:54 PM

Re: '67 3 Speed Parts

Thanks for the inquiry on the bell housing dust cover. I'm sorry but it has sold. I still have the starter cover however.

breeh

07-08-2009 09:58 PM

Re: '67 3 Speed Parts

I must have missed the inquiry by the purchasing party in the thread. Sorry!

All times are GMT -4. The time now is 09:05 PM.