The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Source for original ribbed type vacuum hose? (https://67-72chevytrucks.com/vboard/showthread.php?t=333473)

nyncompute 03-14-2009 08:38 PM

Source for original ribbed type vacuum hose?
 
I'm fixing up the a/c inside and out and I need to find the original type hose that actuates the air doors, and comes off the heater and a/c controller. Anyone got a size /source?

FlartBastinSr 03-15-2009 01:37 AM

Re: Source for original ribbed type vacuum hose?
 
Mine are cracked as well. Interested to know too

cdowns 03-15-2009 06:29 AM

Re: Source for original ribbed type vacuum hose?
 
try YEAR ONE or theres a place i think the name is restoration specialties// at major swap meets theres always a couple of major restoration type suppliers with these type items

70GMCer 03-15-2009 07:39 AM

Re: Source for original ribbed type vacuum hose?
 
Bought mine at the Chevy dealership about 3 years back. Nothing like original parts.

68gmsee 03-15-2009 10:37 AM

Re: Source for original ribbed type vacuum hose?
 
I've been looking for them also. I'm going to try the dealer like 70GMCer says, but if they don't have them I was thinking of ordering here:

http://www.classicparts.com/1964-72-...info/68%2D888/

I did a search a few weeks ago and also found them on some of our other local vendor's websites.

nyncompute 03-15-2009 10:47 AM

Re: Source for original ribbed type vacuum hose?
 
That link to Classic is for duct hose. I need the small diameter vacuum hose that goes to the actuators and controller etc.

71 super 03-15-2009 11:08 AM

Re: Source for original ribbed type vacuum hose?
 
I have had the best luck using Rick's first generation camaro for parts like this they have correct vacuum lines and such. As far as the small diameter a/c control vac lines I have not seen them and I have resorted to robbing from junkers that have not been messed with much. I collect them and usea butter bowl or similar place them inside with a bottle of armor all or similar poured over top and allow it to soak for seveal weeks. As long as they are in good shape to begin with this method will restore them to look and function as original.


All times are GMT -4. The time now is 11:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com