The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   2.5/4 drop. Pics please (https://67-72chevytrucks.com/vboard/showthread.php?t=333804)

chappys4life 03-16-2009 01:09 PM

2.5/4 drop. Pics please
 
Thinking of doing a 2.5"/4" drop but curious what it looks like. Also is it still a pretty good ride? I like the slammed look but had the stiff ride. Had a focus with a h&r cup kit that looked cool but the ride sucked.

gchemist 03-16-2009 02:04 PM

Re: 2.5/4 drop. Pics please
 
http://thumb13.webshots.net/t/51/51/...3BSzNyQ_th.jpg

My truck has a 2.5/4 drop. The picture above has 235/60R15 tires.
So if you add the tires, the drop is more like 5/7". Checkout my webpage for post drop kit installation.

flamingbig10 03-16-2009 05:21 PM

Re: 2.5/4 drop. Pics please
 
my truck is lowered around 6-7 and it ride's nice 3" spindles and springs, with a flip kit and removed leaf springs except it drags the lower controls on bad roads the frame drags on speed bumps, but I would go with a 4-6 it's low but not to low

AceX 03-16-2009 05:27 PM

Re: 2.5/4 drop. Pics please
 
http://img.photobucket.com/albums/v6...5/P1010081.jpg

http://img.photobucket.com/albums/v6...5/P1010076.jpg

Eighty-6 03-16-2009 05:41 PM

Re: 2.5/4 drop. Pics please
 
2 Attachment(s)
Here's mine.

f.monroe 03-16-2009 10:13 PM

Re: 2.5/4 drop. Pics please
 
2 Attachment(s)
Eighty-6 , the truck looks good with those wheels . What are the specs and are those the Boss338's?
Here is my old tan truck . It is a 2.5/4 using spindles in the front and drop leafs in the rear . 18 inch wheels and it rode nice .
Frank

Eighty-6 03-16-2009 10:20 PM

Re: 2.5/4 drop. Pics please
 
Quote:

Originally Posted by f.monroe (Post 3201878)
Eighty-6 , the truck looks good with those wheels . What are the specs and are those the Boss338's?
Here is my old tan truck . It is a 2.5/4 using spindles in the front and drop leafs in the rear . 18 inch wheels and it rode nice .
Frank

Yes, they are the 338's 18x8 for the front and 18x9.5 for the rear.

Slonaker 03-17-2009 12:25 AM

Re: 2.5/4 drop. Pics please
 
http://www.slonaker.net/gallery/albu...al_c10_low.jpg

It was lowered with spindles and drop leaves. I believe it has the same parts as f.monroe's.

Slonaker

chappys4life 03-20-2009 10:07 AM

Re: 2.5/4 drop. Pics please
 
anyone running 17's with a 2.5/4 drop? Just curious what it looks like.

JohnC 03-20-2009 10:42 AM

Re: 2.5/4 drop. Pics please
 
Those Boss 338's are the same wheel I'm looking at. Man those look good.

nico 03-20-2009 10:51 AM

Re: 2.5/4 drop. Pics please
 
Here's mine... 2.5" spindles, shackles and hangers with 17x8 (245/50/17) and 17x9.5 (275/50/17)... It still has the Big 10 leaf springs, but will soon have standard light duty models to make it have a little less rake...

http://i13.photobucket.com/albums/a2...0/PA230093.jpg

Here is the same drop with 17x8's and 255/55/17's all around...

http://i13.photobucket.com/albums/a2...0/P6200062.jpg

JohnC 03-20-2009 10:56 AM

Re: 2.5/4 drop. Pics please
 
Hey I contacted you about your truck when I was looking for mine. I'm up here in Noble. Did you decide not to sell it? It's a nice looking truck

Silence86 03-20-2009 11:06 AM

Re: 2.5/4 drop. Pics please
 
anyone running 20s with this lowering? i wanna do it also but idk what effect the wheels and tires will have... help?

joe231 03-20-2009 11:09 AM

Re: 2.5/4 drop. Pics please
 
Quote:

Originally Posted by nico (Post 3208412)
Here's mine... 2.5" spindles, shackles and hangers with 17x8 (245/50/17) and 17x9.5 (275/50/17)... It still has the Big 10 leaf springs, but will soon have standard light duty models to make it have a little less rake...



Here is the same drop with 17x8's and 255/55/17's all around...

which wheels are you running currently?

flamingbig10 03-20-2009 11:35 AM

Re: 2.5/4 drop. Pics please
 
$50 2.5/4 really worn stock coils with a coil cut off, drop shackles and 3 leafs with no over load
http://i147.photobucket.com/albums/r.../Truck86-1.jpg

nico 03-20-2009 11:58 AM

Re: 2.5/4 drop. Pics please
 
Quote:

Originally Posted by JohnC (Post 3208423)
Hey I contacted you about your truck when I was looking for mine. I'm up here in Noble. Did you decide not to sell it? It's a nice looking truck

Yes, I think I'm going to keep it... I had just lost interest in it for a couple months, but now am thinking about revising it for the summer... Thanks for the compliments.

Quote:

Originally Posted by joe231 (Post 3208435)
which wheels are you running currently?

All of them... I actually have a set of Rally's with Radial T/A's, Cragars with Radial T/A's, the Torq Thrusts and the Eagles... The Eagles are currently on my 88 Suburban and the Torq Thrusts are on the 84.

JohnC 03-20-2009 12:45 PM

Re: 2.5/4 drop. Pics please
 
Oh to have that many options! :metal:

gchemist 03-22-2009 03:16 PM

Re: 2.5/4 drop. Pics please
 
More info: Hi Chevymotocross,
Did you see all my pictures on http://www.geocities.com/abetterchem...it/dropkit.htm The tires in the photos are 235/60R15.

Here is one photo with 255/60R15 all the way around.
http://thumb13.webshots.net/t/74/74/...3vccXWW_th.jpg
The passenger side rear sits 1" higher than the driverside. I hope it levels out once I install lowering leafs and clean up the rear. I don't have any other recent photos. I'll take some later this week. I now have matching 255/60R15 all the way around. The front has 1.5 coil and 2.5 spindal. The rear is a 4" hanger and shackel combo.
http://thumb13.webshots.net/t/50/750...3LCjdNF_th.jpg
http://thumb13.webshots.net/t/69/569...3ByeWTn_th.jpg
http://thumb13.webshots.net/t/72/72/...3uuxutO_th.jpg

Aplicon 12-07-2022 06:44 PM

Re: 2.5/4 drop. Pics please
 
Quote:

Originally Posted by Eighty-6 (Post 3201331)
Here's mine.

eight 6 what is your tire size with the 18 338"s?

SCOTI 12-09-2022 11:58 AM

Re: 2.5/4 drop. Pics please
 
Quote:

Originally Posted by Aplicon (Post 9152824)
eight 6 what is your tire size with the 18 338"s?

That post/thread was made in the Spring of 2009 in case you didn't notice.

Aplicon 12-09-2022 01:04 PM

Re: 2.5/4 drop. Pics please
 
And Your Point? You all spend so much time scolding us for not checking existing threads, and yet you reply like that. Hypocrisy seems to run rampant in these forums. I would rather post on an old thread then get made fun of and scolded by members like you for starting a new thread. Thank you captain obvious.

SCOTI 12-09-2022 03:01 PM

Re: 2.5/4 drop. Pics please
 
Quote:

Originally Posted by Aplicon (Post 9153419)
And Your Point? You all spend so much time scolding us for not checking existing threads, and yet you reply like that. Hypocrisy seems to run rampant in these forums. I would rather post on an old thread then get made fun of and scolded by members like you for starting a new thread. Thank you captain obvious.

You jump to comclusions. Not every person that makes their first post realizes the threads age.

No one is scolding anyone. I merely pointed out the fact that the thread was 13yrs old. You seem bitter about something??

My point was maybe research the specific member you're asking for info to see when they were on here last (not everyone is still around after 13yrs).

Beyond that, if you took a minute to research me, there's zero hypocrisy nor bullying/name calling done by me. I'm not sure who "you all" applies to but I'm a long standing member here to help fellow enthusiasts.

Try not to judge someone before having your facts straight.

Aplicon 12-09-2022 03:15 PM

Re: 2.5/4 drop. Pics please
 
Thank you for your response, I will seek the info elsewhere. So far this site has been very unfruitful. And for your info, I have had luck with these old posts. Regardless of the age of the post. Thank you for your concern and pointing out the old post. Better to seek out assistance within my local area and on the actual square body sites. Not upset with you SCOTI, and I apologize as just frustrated with past treatment on this forum. Too many opinions and derogatory comments ( again not you). Have an excellent day. http://67-72chevytrucks.com/vboard/i...lies/metal.gif

SCOTI 12-09-2022 04:54 PM

Re: 2.5/4 drop. Pics please
 
Quote:

Originally Posted by Aplicon (Post 9153471)
Thank you for your response, I will seek the info elsewhere. So far this site has been very unfruitful. And for your info, I have had luck with these old posts. Regardless of the age of the post. Thank you for your concern and pointing out the old post. Better to seek out assistance within my local area and on the actual square body sites. Not upset with you SCOTI, and I apologize as just frustrated with past treatment on this forum. Too many opinions and derogatory comments ( again not you). Have an excellent day. http://67-72chevytrucks.com/vboard/i...lies/metal.gif

No worries here. You tagging in on the thread was not a bad idea @ all. Sometimes bringing the older stuff back revitalizes the specific/target info you might be seeking & gets updated info + pics in the process.

I encourage you to stick around. There's a wealth of knowledge here & the quality of the members willing to help surpasses that knowledge.

rodstored-72 12-19-2022 12:03 PM

Re: 2.5/4 drop. Pics please
 
in general.. I agree...... I encourage you to stick around. There's a wealth of knowledge here & the quality of the members willing to help surpasses that knowledge. I can also understand the other point, in today's time, enthusiasts are posting more on social media & adding info on there as opposed to on this forum - for example. I am "ol' school" and do not have a social media presence and get "heckled" at local events for not knowing someone's IG name.. :lol:!! I do hope that you will give this site a second look and time to go thru some threads - old and new, there really is a wealth of knowledge on here & some pretty famous builds as well.
in any case we wish you luck and hope you find what you are looking for ;)


All times are GMT -4. The time now is 11:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com