1982 chevy c10 stepside lowering
 

hello i have a 1982 chevy c10 stepside that i want to make into a pro street style truck. any ideas what kind of trop i will need im putting 15 inch rims all the way around. any ideas would be appreciated and pictures if you want to send them.thank you

Re: 1982 chevy c10 stepside lowering
 

somebody please help ive been thinking about this all week thanks

Re: 1982 chevy c10 stepside lowering
 

You need to be more specific on what you plan to run. When you say "Pro Street", does that mean a narrowed rear with a 4 link? Are you considering a panhard bar or watts link? Coil overs, bags or leafs?

Help us so we can help you...:)

Re: 1982 chevy c10 stepside lowering
 

ok sorry bout that m not going to narrow the rear at al just run coilovers in the front and im thinking about flipping the rear axle. im just wanting it to be low but not slammed.

Re: 1982 chevy c10 stepside lowering
 

Here is my truck 6 years ago. It had just a flip kit in the rear and a 2" lowering spindle with (I think) a 2" lowering spring in the front. That was a 28 or 29" tall tire, 15x8 front, 15x10s rear. To get it slightly lower and sit real nice I would do a flip kit and remove the overload leaf in the rear. In the front I would do a 5" drop in the front. 3" lowering spindle? and a 2" spring.
http://www.geocities.com/jcs9614/Truck-03-09-03.jpg

Re: 1982 chevy c10 stepside lowering
 

mine's kinda pro street
3" spindles and springs and a 6" flip kit with 3 leafs no over load in front 15x7 215/ 70 26.9" tall back 15 x8 275/60 28" tall
http://i147.photobucket.com/albums/r...0/IMAG1498.jpg
http://i147.photobucket.com/albums/r...0/IMAG1470.jpg