A 70 GMC now
 

This is a 70 GMC C20, I will be parting it out as usual;) Ask questions in thread. Pay pal or money order. Thanks Randy
Exhaust manifolds $50 plus shipping for pair-SOLD
4 speed high hump $25 plus shipping
4 speed steering column $40 plus shipping-SOLD
V8 motor stands $30 shipped
Good radiator support, $50 sale pending
metal door panels, drivers has a couple small dings and a ring where the window crank rubbed, pass is is beat up bad $10 plus ship
See anything else you may want ask and I'll price, Thanks Randy

Re: A 70 GMC now
 

would you consider clipping the header pipes out ( not the rams the acual pipes) with the clamp ring?? the E brake cables,and I need a upper radiator support hold down for a 4 core I have a 70 I'm trying to put together on a low budget
thanx jeff

Re: A 70 GMC now
 

Randy,
I need a passenger door. I know you normally don't ship the heavy and or big parts, but I need a right door.
Kerry

Re: A 70 GMC now
 

Hottrucks, how much of the exhaust pipes you needing? Sorry it doesn't have any E-brake cables on it. No upper 4 core mounts, I'll look and see if the lowers are there.
Wootdog, Kerry, sorry I still don't mess with shipping doors
Thanks Randy

Re: A 70 GMC now
 

how much would shipping on the 4spd column be to Va. 23061? thanks

Re: A 70 GMC now
 

Do you have these two parts? They are the Steering column front and support plates.

Re: A 70 GMC now
 

randy I would take as much as it has or is easy to get out I'm going to have to build a full exhaust anyway..I need the steel plate that hold the rad not the rubber so much..and the splash well from the drivers side bed ( THE LITTLE PART FROM THE WHEEL WELL TUB TO THE BOTTOM OF THE FENDER) sorry caps) \

I'm just tearing into this so I may need more stuff as I get though today

thanx
jeff

Re: A 70 GMC now
 

i need the ignition switch spacer shipped to 95901? thanks

Re: A 70 GMC now
 

bad421, I'll get a quote this weekend for you
gotwake, Yes I have both of those $20 shipped for pair, I know I have the four lower bracket bolts, but unsure if I have the upper one, but I'll look
Hottrucks, Jeff, I can cut it past the bend no problem $15 for pair, the upper 4 core brackets are not there, sorry. The bed splash pan is $10, so $25 plus shipping for what your asking about?
vasquezmrysvll, sorry it doesn't have a key in it for me to pull the ig switch. I could cut the whole switch out for you. $15 shipped?
Thanks let me know guys, I'm not going to be able to do much today, Sleeting, snowing and Wind is BLOWING hard today, Randy

Re: A 70 GMC now
 

Randy=
How are the headlight trim rings?
Shipping to 21157?
Thanks!

Re: A 70 GMC now
 

I'll have to check them out, I never looked at them. It will probably be Sun befoer I get out there. Thanks Randy

Re: A 70 GMC now
 

thanx T cut it as far back as you dare and I'll take the splash pan too
let me know what shipping is I'll pm you my addy

thanx Jeff

Re: A 70 GMC now
 

Hottrucks, Jeff, it will probably be Mon after work before I get out there to cut them off. Thanks Randy

Re: A 70 GMC now
 

no biggie I'm not in a big rush

Re: A 70 GMC now
 

Randy, if the dash isn't cut I am interested in the dash around the radio and ac.

Re: A 70 GMC now
 

I think I may end up being out there today pulling a motor out of the 68, I'll try to look at everything everyone has asked about and hopefully have time to get some of the parts off.
Stope, this truck doesn't have AC on it? Wan't sure if you were needing one with AC or not?
Thanks Randy

Re: A 70 GMC now
 

Curbstone, the driver side has a dent in lower middle and one on the outside lip and some surface rust, pass looks OK. $12 plus shipping for pair
Hottrucks, got your stuff off but I need to get a box to figure shipping, I'll do that Mon after work.
Stope4, its in good shape $15 plus shipping
Thanks let me know guys, Randy

Re: A 70 GMC now
 

need one with ac. thanks

Re: A 70 GMC now
 

Grille, surrounding trim and core support?

Condition of those and prices please. I'd pick up instead of shipping.

Re: A 70 GMC now
 

t hold up a sec I just bought a parts truck yesterday so I need to se what it has on it I'll be picking it up wed eve
thanx Jeff

Re: A 70 GMC now
 

stope4, I'll have one coming in a truck next week
MonteSS454, grill and surround is all dented up. Core support is pretty decent, I'll get pics later today of it all, $50 for it.
Hottrucks, thats fine just let me know
Thanks Randy

Re: A 70 GMC now
 

Ok, thanks if the core is as good as you say I'll be pming you.

Re: A 70 GMC now
 

Monte, here are some pics, part of the inner fender is still bolted to it on both sides. It has one spot where there is rust, see pic, it is not through. The area below the battery tray on the bottom side is pitted but not rusted through. Thanks let me know, Randy
1) whole support
2) drivers side top
3) driver side bottom
4) pass side top
5) Pass side bottom

Re: A 70 GMC now
 

Here is the small rust area

Re: A 70 GMC now
 

More parts