The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   parts (https://67-72chevytrucks.com/vboard/showthread.php?t=33678)

rayville body 12-21-2002 04:25 PM

parts
 
a few parts left on a 86 GMC 2500.

cowl $10

cowl trash screen $10

plastic sill plates $5

wiper linkages $10

lower valance with trim $10

ashtray $5

single headlight core support w/harness & trim $25

A/C box $25

power steering gear box (has little slack) $15

silverado fender emblem 73-80 $5

front bed panel (fleetside) $20

headlihgt bezel (85-87 single headlight) $5

upper column cover (plastic) $5

lower column cover (metal) $5

hood hinges $10pr

zstarkey 12-27-2002 11:49 PM

SEATS
 
DID THIS TRUCK HAVE BUCKET SEATS AND IF SO ARE THEY IN GOOD SHAPE

rayville body 12-28-2002 04:07 AM

no, it did not have bucket seats, sorry

Txstruck 12-29-2002 04:01 PM

Is it a complete AC unit? Compressor and all?!

Also, do you have the wiper motor? If so is it intermittent or just high low? Oh, and the dash pad? Have it? I need one bad!!

Thanks

ElGracho 12-29-2002 04:18 PM

Quote:

Originally posted by Txstruck
Also, do you have the wiper motor? If so is it intermittent or just high low?
There is no such thing as an intermiittant or high/low wiper motor for the 73-87 trucks. The motors (for a given year) are the same for intermittant wipers or not. The difference is in the wiper switch and trucks with intermittant wipers will have a control box somewhere under the dash. Its not hard to convert a non intermittant truck to intermittants. The hardest part is for 83 and up trucks where you have to take the steering column apart to change the wiper/turn signal stalk.

Txstruck 12-29-2002 05:14 PM

Ok well then I need the motor either way. I have an 86 K30.

rayville body 12-29-2002 10:10 PM

the A/C unit does not have the compressor, hoses or accumulator. no dash pad and no wiper motor. sorry i cant help.

bigblock73 12-29-2002 11:59 PM

Is the front bed panel rust and dent free?

If so I am interested, which brings me to my next question...would you ship it??

Thanks in advance! :)

-Jeff

rayville body 12-30-2002 05:33 PM

yes it is rust and dent free! i can ship it but would have to find a box that it will fit in and find out what it will cost. my mom works at a UPS pickup so that wont be to hard to do.what is your location and zip?

gchemist 12-30-2002 10:38 PM

Do you still have the wiper arms w/washer tubing running in them $10??
I'm interested in them.

bigblock73 12-31-2002 12:30 AM

Sent you a PM on the front bed panel! :)

-Jeff

rayville body 12-31-2002 09:25 AM

yes i still have the wiper arms. do you want them? $10+$4 shipping

gchemist 12-31-2002 10:15 PM

Deal :cool:

E-mail me your address and I'll put a money order or something in the mail. Thanks.
Gerardo

rayville body 01-01-2003 02:31 PM

wiper arms are sold.

rayville body 01-21-2003 10:48 PM

ttt

rayville body 02-19-2003 01:17 AM

ttt

old Rusty C10 02-19-2003 03:18 PM

still got the inner fender? and if so is it completely rust free ( surface rust ok no holes though) and it will fit a 76 truck?
If so how much to ship to 11215 area in NYC

rayville body 03-01-2003 05:00 PM

ttt


All times are GMT -4. The time now is 10:51 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com