The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)

- - 72 Chevy Upper Control Arm Bushings (https://67-72chevytrucks.com/vboard/showthread.php?t=339102)

chadvicki

04-15-2009 12:27 AM

72 Chevy Upper Control Arm Bushings

My upper control arm bushings have a lot of slop in them and I want to change them. Does anyone have a picture build on how to do it or maybe know a link to How-To.

Thanks for the help,

Chad

kevncar

04-15-2009 12:37 AM

Re: 72 Chevy Upper Control Arm Bushings

I can't remember if there Is a FAQ on that or if it was in rockrln's "low buck" build thread, but I know I've seen a good write up with pictures somewhere

royo	04-19-2009 03:39 PM

Re: 72 Chevy Upper Control Arm Bushings

Quote:

Originally Posted by chadvicki (Post 3257973)

My upper control arm bushings have a lot of slop in them and I want to change them. Does anyone have a picture build on how to do it or maybe know a link to How-To.

Thanks for the help,

Chad

The bushings well they kinda screw right out and right back in. have you priced any? they are kinda pricey. mite be better to find some later model ucas and put them on justmy2cent

mycool72

04-19-2009 07:30 PM

Re: 72 Chevy Upper Control Arm Bushings

x2, they just unscrew on each side.

All times are GMT -4. The time now is 06:16 AM.