The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   hey 55+ up guys (https://67-72chevytrucks.com/vboard/showthread.php?t=339786)

cajundragger 04-19-2009 12:08 AM

hey 55+ up guys
 
Im looking for pics of trucks for my dad. He has a '56 and the front IFS package he is looking at puts the front spindle at 2" above the bottom of the factory frame. anyone have pics of their truck at this height?

if nobody has their truck as this height, could you post pics with an approx height from the spindle to the bottom of the frame so I can get an idea of where 2" above the bottom of the frame is? also if you could say what size wheel and tire you have as well that would help.


Thanks everyone.


edit, this would be the spindle, as the part the hub goes on(aka the wheel center line), not the spindle that the ball joint and tie rods go into.


All times are GMT -4. The time now is 05:29 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com