![]() |
6 Lug Rally Wheel Center Caps
2 Attachment(s)
I just restored some 15x7 6 lug rally wheels (post 1973) that I put on my 1968 truck. My truck is 2wd 1/2 ton c10 so I do not need the big 4x4 caps that I have for any clearance issues.
Does anyone make a modified (smaller) center cap for these 6 lug rallies for 2wd trucks? Seems like someone should since I see a ton of these on 60-72 trucks. Thanks. |
Re: 6 Lug Rally Wheel Center Caps
Subscribed.I been trying to come up with something since I really don't like the original 4X4 caps.I wish they had nubs to run baby moons or poverty caps.
|
Re: 6 Lug Rally Wheel Center Caps
1 Attachment(s)
I run these on my '69 6 lug ralleys.
You can find them on ebay. They require a 7/16" conversion lug nut. |
Re: 6 Lug Rally Wheel Center Caps
Quote:
|
Re: 6 Lug Rally Wheel Center Caps
1 Attachment(s)
Are those chrome or the reproduction ABS ones? These are the ones I restored, they are just huge.
|
Re: 6 Lug Rally Wheel Center Caps
the ones above were always chromed plastic. They are off later model GM trucks. I have 5 lug verson of that on my burb
|
Re: 6 Lug Rally Wheel Center Caps
Is there small "bosses" on the back of those new style caps you could drill and screw from the backside?
|
Re: 6 Lug Rally Wheel Center Caps
I put 6 lug 16's on my 70 newer style wheels and I got the lugs from stockton wheel they a not that expensive!
http://www.stocktonwheel.com/ |
Re: 6 Lug Rally Wheel Center Caps
yep. That's how I did mine.
http://67-72chevytrucks.com/vboard/a...1&d=1214876134 Here's the thread for my rim job (wheel restoration) http://67-72chevytrucks.com/vboard/s...d.php?t=281527 |
Re: 6 Lug Rally Wheel Center Caps
1 Attachment(s)
Here's a shot of the 6lug versions.
|
Re: 6 Lug Rally Wheel Center Caps
Your wheels are 8",no 7" 6-lugs made.The conversion lugs are the same duplex style but in sAE thread to go on earlier truly American trucks.The plastic hold-down lugs are black,if you go that route.
I likr=e the later style,but the originals look fine.Guys were doing what you are doing way before the`88s came out.You get the center stickers for the funky wheel covers from late-70s-95 with the fake pyrmid nuts. |
Re: 6 Lug Rally Wheel Center Caps
chevlwb68 - I like what you did with the rims...are those trim rings or did you just paint the middles only?
thanks, Jay |
Re: 6 Lug Rally Wheel Center Caps
[QUOTE=special-K;3280385]Your wheels are 8",no 7" 6-lugs made.
Incorrect. I own two 7" 6 lug ralleys. They aren't very common,... but they did make them. |
Re: 6 Lug Rally Wheel Center Caps
1 Attachment(s)
Here's my 7's and 8's on the my '69.
|
Re: 6 Lug Rally Wheel Center Caps
I`ve never seen factory 7" rims.What 4wd did they come on?I`m open to learning something new.
|
Re: 6 Lug Rally Wheel Center Caps
Me too.I could use some 7's to bring my fronts in instead of having them out that extry in.
|
Re: 6 Lug Rally Wheel Center Caps
5 Attachment(s)
All four are 15x7". GM factory stamped. Do not know what they came off or exact year except I know they 73 and up. I got them off a guy on craigslist for $65 bucks. Sanded them down to bare metal and primed them. Then I used Duplicolor's Performance Wheel Coating paint in a rattle can, Silver, and painted the whole wheel. Turned out great. I primed and painted the fronts, backs, and the middle part you do not see under the tire. I have a buddy who does paint at Napa so I had him use the Spectra Eye Gun and get as close of a paint code for the truck color as he could . Mixed me up a quart of that in Enamel Lacquer. Shot the middle with of the wheels with that using a Siphon Paint spray gun.
The beauty rings are the 3'' deep dish ones. Kinda wish I would have the done the 2'' ones, but oh well I got a good deal on them. I got the rings brand new for $60 (all 4) at the swap meet. They are the SS ones, not the pop can aluminum Taiwan ones. The Center Caps I got at the swap meet also for $20 bucks for all four. Used and beat up. Peeled off the center faded metal stickers, scrubbed them with steel wool, and then buffed and polished them with Blue Magic chrome wheel polish. Running BFG Radial TA's. Front: 245/60R15 Back: 275/60R15. I spent a lot of love and time with these things. I like to stare at them a lot now. lol. Hope this helps anyone looking to do the same. Here are some new pics I got of them. |
Re: 6 Lug Rally Wheel Center Caps
perfect!
|
Re: 6 Lug Rally Wheel Center Caps
ok you didn't hear this from me but if you have a hot rod shop for BIG trucks you can get a 6" center cap for there axles ...it locks on the edge of the nuts that hold the axle in on the hub of big trucks..the same should work for you...it wil look ike a baby moon.....as soon as my truck hits the road its heading the the shop to try some on
Jeff |
Re: 6 Lug Rally Wheel Center Caps
Let me know how that turns out and how I can get some.
|
Re: 6 Lug Rally Wheel Center Caps
Quote:
I was telling member tcb-1 how hard they are to find,... then I meet him last year at the Lawerence, KS swap meet,... and there were 2 complete sets there. My buddy, member "hot trux",... also has a pair. I've had one wheel for many years,... trying to find another one, to make a pair. I finally found the second one about 2 years ago. |
Re: 6 Lug Rally Wheel Center Caps
Ok,so they were prolly used on TerraVans.I guess they need a narrower track.I can see the wheels look different.Look kinda like a Yota wheel profile,but GM style.Those would be rare.
|
Re: 6 Lug Rally Wheel Center Caps
okay so I just realized also that the 6 lug wheels have 10 holes (openings?...don't know what to call them) in them, while the 5 lug have 16. interesting, but cool......so it does seem to be a little rare.
|
Re: 6 Lug Rally Wheel Center Caps
The 8" ralley have the same 10 holes (slots) They are a little bigger slots than the 5 hole ralleys.
|
Re: 6 Lug Rally Wheel Center Caps
Quote:
(Just worked out that way,not into tit for tat;)) |
All times are GMT -4. The time now is 11:01 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com