FRONT SWAY BAR ADD ON
 

will the sway bar from a 74 half ton bolt onto my rig without drilling holes?

------------------
72 GMC C1500 2WD LWB
As for me and my house, we shall serve the Lord.

With different bushings i think so yes, if your rig came with a front bar. Why use a half ton though? you could use a 3/4 or 1ton bar and it'll make your front end firmer. If i'm wrong ont the swap some one here will correct me i'm sure.

------------------
69 Custom 20, 396BB,Longbed fleetside.
New Oak Bed With SS strips.

Edelbrock performer RPM-O, Edelbrock 750Carb, Headers, HEI, 2 40" glasspacks.
Stereo: Classic-style tape deck/radio, 2 6x9 Cerwin Vega's in doors, 2 10" Neo subs under seats, 1 900 Watt amp.

SN= Ares220 on AIM.

Located in Beautiful Southern Cali or Michigan when i'm at school.

You will have to drill out 2 rivets out of the front crossmemeber to bolt on the frame swaybar brackets.

------------------
'69 CST Short fleetside
Lowered, 400 small block, 700R4, 3" dual exhaust, 40 series Flowmasters, 4 wheel disc brakes, all stainless hard and flex lines, front & rear sway bars, Dana 9 1/4" rear end 4.11's w/Detroit Locker, soon to have 18" rims
Not my daily driver. More like my weekend A$$ KICKER.
See my truck at: http://www.geocities.com/low69cst/
Future Automotive Engineer attending the University of Kentucky.
Feel free to message me on AOL, SN- SS95ZQ8
My Dad's projects:
72 Short Fleet 4x4 Chyenne Super
72 Long Fleet 4x4 Chyenne Super
Both 350 autos restored original

Big69: Will the bars from the 3/4 and 1ton work OK too? The one I'm looking at is 1 3/16". How much bigger are the others?
Low69: Two holes, huh? Thats not too bad. Thanks for the info.

------------------
72 GMC C1500 2WD LWB
As for me and my house, we shall serve the Lord.

1 1/16" bars will work too, all of them C30 and under are all same dimension,s just different diameters is all, brackets same, no problems through 87,

happy swapping,


------------------
Randy- Lincoln, IL
randy@ccaonline.com 2177353230
*many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme and 84 SE Firebird T5 3.73

current fleet: -71 C-10 350/CH465/3.07- assembling currently
-90 Cavalier/2.2/sky blue, driver #2
-84 Z28 5.0L/700R4/3.73 daily driver #1
-'90 Corsica 3.1L and '82 purple Trans Am- storing *Paint is overrated* © RSS Enterprises 2000



[This message has been edited by Fast68Chevy (edited May 17, 2002).]

that 1 3/16 is a big bar. i think there are 1 1/4 bars out there, and if you buy one from a nice 4x4 shop they might have some bigger, maybe 1 5/8 possibly. Good luck.