Best spark plug wire loom?
 

Howdy, Im sick of wires always looking so sloppy, whats a good loom for a sb with headers? I need the wires to go from the middle between 2 header tubes (right where the valvecover bolts are) and then spread out the the plugs if you know what I mean.
I have a decent set of chrome holders that will do that though, they bolt down under the valve cover bolts. Thanks for any info.
CoryM


------------------
1970 heavy duty C-10 fleetside sport truck. Vancouver B.C. Canada
http://www.geocities.com/chevroletc1070


"Take up our quarrel with the foe:
To you from failing hands we throw
The torch; be yours to hold it high."
Lieutenant Colonel John McCrae, Canadian Army

Check out these guys. You can buy their stuff from Summit Racing or at most any hot rod shop.
http://www.made4uproducts.com

------------------
MikeB
69 C-10 Fleetside, mild 383, Dart Iron Eagle heads, Crane Energizer 266 cam and 1.6 roller rockers, Edelbrock Performer manifold and 600cfm carb, HEI w/ MSD components, 1986 front spindles/disc brakes, Vintage Air in-dash.


[This message has been edited by MikeB (edited May 17, 2002).]