The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Can anyone Tell me...??? (https://67-72chevytrucks.com/vboard/showthread.php?t=34615)

bill_ont_canada

01-01-2003 02:07 AM

Help STEPSIDERS, Can anyone Tell me...???

The STOCK measurements from the ground to the fender lips measured through the center of the wheel to the lip above the tire on a 76 STEPSIDE ...

I assume '73 to '80 will be the same

STOCK- meaning as they came from the Factory with Stock Tires whatever size they may have been.

All replies are appreciated.

HAPPY NEW YEAR TO ALL

pkbinplano

01-01-2003 09:55 AM

With 255's mine is 31 front, 31 5/8 rear from ground to top of fender well lip. Mine is stock height lwb Hope that helps

bill_ont_canada

01-03-2003 03:51 AM

Thanx pkbinplano for the reply, I really need the measurement of the back fenders on a Stepside.

J-Spec C10

01-03-2003 10:19 PM

Bill, I don't really think it'll be that much different, if you look at a pic of a stock C10 and a stock C10 stepside, the space looks almost identicle.

All times are GMT -4. The time now is 06:18 AM.