The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)
-   -   Where can I locate ft & rr coil springs with 2" or 4" lift over stock? (https://67-72chevytrucks.com/vboard/showthread.php?t=346351)

1972GMCSUB 05-31-2009 02:46 AM

Where can I locate ft & rr coil springs with 2" or 4" lift over stock?
 
Hi there, I'm new to the forum and I just recently bought a 1972 GMC Suburban 2 wheel drive and I'd like to lift it up just a little bit over the stock height. I would like to know if I can go to either 2" or 4" above the stock height without having to change anything like the brake lines or anything at all.

And my second question is, assuming I can go to either 2" or 4" above the stock height without having to change anything, where can I get the coil springs? I found the stock springs at my local auto parts store so I know that I can go the stock route if need be, but I'd first like to see if I can get springs that will lift my Suburban up 4" preferrably above stock.

Thanks for your help,

Chris
dukecac@aol.com


All times are GMT -4. The time now is 08:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com