cab corner replacement >>>
 

http://www.hpphoto.com/rs/D7B59EBD-6...77A760E/screen

Very nice...

Time for some epoxy primer.

------------------
'68 C20 - fresh 355,CH465,Dana 60, front disc brakes, rough body
'68 Chevelle ragtop project
'57 Belair hardtop project
'00 S10 pickup daily driver
'00 Chev Malibu the wife's car
tons of ambition

I wish you lived around here.....I need a good teacher http://67-72chevytrucks.com/board/ubbhtml/smile.gif
Looks good!!

do you use patch panals or make your own patches?

I use the aftermarket ones. They never seem to fit good, so I just hammer them til they fit.
seems they are thicker than the original sheet metal, I'll measure tomorrow...

[This message has been edited by ebfabman (edited May 18, 2002).]

I just did the driver side on mine yesterday and it was a piece of cake. Mine fit perfectly. Paint is next.

I agree that they do appear thicker than the stock sheetmetal. Finally, something in our favor on repro parts! http://67-72chevytrucks.com/board/ubbhtml/wink.gif

Wish I had a digital camara!

------------------
63 Impala*66 Chevelle SS*69 Chevelle*69 C10 Stepside*71 Cheyenne 20*72 Chevelle

Parts for sale:
http://www.angelfire.com/trek/mr409/items4sale.html



[This message has been edited by bobs409 (edited May 18, 2002).]

On mine we had to bend them around a bit to get them to match up correctly We didn't replace it all the way back to where the indentations are in the back of the cab... we trimmed that off. That way we didnt have to worry about lineing that up.
TTYL
Nick http://nickrod.port5.com

------------------
Nick Rodenberg
Wellington, MO
http://nickrod.port5.com
You can click on "My 72 Chevy Truck"
I have a 72 Cheyenne 10 with a V8 350 and a TH-350 auto-tranny.
Ochre/White/Ochre
Runs well... working on body.
Plan to get painted weekend before memorial day weekend.
Planned to be done March 7 when I turned 16. Didn't happen. Chose to do better job and be behind schedule instead of 1/2 doing it and it looking like junk.