The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   72 front disk set up s.e. pa. local p/u only (https://67-72chevytrucks.com/vboard/showthread.php?t=348018)

oldschooler 06-11-2009 02:34 PM

72 front disk set up s.e. pa. local p/u only
 
I have a front disc set up spindle to spindle off a 72 frame I bought from another member. Everything is rusty from sitting out. 1 upper control arm has rust through. I would replace the calipers(good for cores). Rotors should clean up with a good turning, I assume spindles are stock height. Coils should clean up nice. 50.00 for the whole shebang. I can take pictures or you are more than welcome to stop by and take a look. I live between York pa. and Hanover Pa. Later, Rich

jaros44sr 06-12-2009 12:32 AM

Re: 72 front disk set up s.e. pa. local p/u only
 
5 lug or 6 lug?

oldschooler 06-12-2009 06:58 AM

Re: 72 front disk set up s.e. pa. local p/u only
 
Quote:

Originally Posted by jaros44sr (Post 3355754)
5 lug or 6 lug?

Sorry about that, 5 lug 2 wheel drive 1/2 ton. Later, Rich

jaros44sr 06-12-2009 09:40 AM

Re: 72 front disk set up s.e. pa. local p/u only
 
Sorry won't work for me...good luck with your sale

oldschooler 06-13-2009 01:05 PM

Re: 72 front disk set up s.e. pa. local p/u only
 
ttt

spatz 06-13-2009 08:38 PM

Re: 72 front disk set up s.e. pa. local p/u only
 
I am interested in the front crossmember that you have for sale for $50.00.
I can be in your area on the 2nd or 3rd of July to pick it up. just let me know, how is the crossmember itself, any rust through the crossmember? Also ill pay for it when i pick it up if ok. please send pics if possible.

oldschooler 06-14-2009 04:54 AM

Re: 72 front disk set up s.e. pa. local p/u only
 
Quote:

Originally Posted by spatz (Post 3358310)
I am interested in the front crossmember that you have for sale for $50.00.
I can be in your area on the 2nd or 3rd of July to pick it up. just let me know, how is the crossmember itself, any rust through the crossmember? Also ill pay for it when i pick it up if ok. please send pics if possible.

I was going to use the crossmember off of the donor frame. Did you want all the other stuff also? Let me see what the crossmember looks like on my truck, for another 15.00 I could probably do that, just to get rid of everything. Pm me your e-mail address, and I will send you some pictures this week. I think the only rust through was on the d.s. upper control arm. july 2-3 sounds o.k., also payment when picked up is fine. Later, Rich
p.s. I can get pictures taken today if still interested.

spatz 06-14-2009 01:15 PM

Re: 72 front disk set up s.e. pa. local p/u only
 
Quote:

Originally Posted by oldschooler (Post 3358917)
I was going to use the crossmember off of the donor frame. Did you want all the other stuff also? Let me see what the crossmember looks like on my truck, for another 15.00 I could probably do that, just to get rid of everything. Pm me your e-mail address, and I will send you some pictures this week. I think the only rust through was on the d.s. upper control arm. july 2-3 sounds o.k., also payment when picked up is fine. Later, Rich
p.s. I can get pictures taken today if still interested.

sounds good. E-mail is kaffyt_bear@yahoo.com i can get by with my crossmember just got to patch a rust through spot. but upper and lower a arms, spindles and everything else will be needed. thanks and ill wait for a reply so that we can set a time that would good for you for me to stop by pick everything up. thanks again.


All times are GMT -4. The time now is 09:29 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com