3/4 ton Disk Brake Rear end
 

This rear end was ran dry shortly after new brakes, rotors and calipers were installed. Good pieces to convert your rear end or rebuild this one and move the saddles and shock mounts and instal it. 4:10 gears It was removed from a 98 Chevy Silverado HD. Complete with cables and brake lines. $100.00 WES

Re: 3/4 ton Disk Brake Rear end
 

Wow, no interest for a set of 3/4 ton rear disk brakes..lol WES

Re: 3/4 ton Disk Brake Rear end
 

Location, location, location. I would snatch that up if I was nearby.
Bump, I hope someone puts those disks to use !

Re: 3/4 ton Disk Brake Rear end
 

WEs, do you know if that will bolt up to an HO52/D60? If so, I am interested.

Re: 3/4 ton Disk Brake Rear end
 

breeh, This would not be a bolt on aplication. You would have to have special brackets made. Blackbird's customs could tell you more about that than I could. WES

Re: 3/4 ton Disk Brake Rear end
 

Wes is this a straight swap with a '95 chev 2500 14 bolt full corp? does everything just mount on the outside? always wanted to change to 6 bolt. if so let me know. I'm interested, call you tomorrow.

thx,
Al.

Re: 3/4 ton Disk Brake Rear end
 

What lug pattern is this?

Re: 3/4 ton Disk Brake Rear end
 

This is a 98, 3/4 ton HD Rear end. It has the GM 8 lug bolt pattern. WES

Re: 3/4 ton Disk Brake Rear end
 

Thanks for the info Wes. I will pass. I need to work through some of my current projects first. I thought that if it was just a bolt on then I could justify adding another thing to my ever growing list.

Re: 3/4 ton Disk Brake Rear end
 

Your welcome. WES