The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   Need an easy measurement (https://67-72chevytrucks.com/vboard/showthread.php?t=350847)

argonaut 06-29-2009 08:08 PM
Need an easy measurement
 
Can measure the height from the bed floor to the lowest point when the rear hatch is up? I don't have access to my blazer at the moment and I need to find out how tall of an item I can pass through the rear opening.
Thanks!

bouncytruck 06-29-2009 10:46 PM
Re: Need an easy measurement
 
Sorry, the tops not on my truck right now so I can't get the measurement. Of course, if you pull the top, you won't have the issue...

tdkosta 06-30-2009 09:32 AM
Re: Need an easy measurement
 
bump

I can get a measurement for you tonight if you don't have one by then.

argonaut 06-30-2009 10:49 AM
Re: Need an easy measurement
 
Yes, please.

1949gmc 06-30-2009 11:37 AM
Re: Need an easy measurement
 
Mine measured 39 1/4 inches from bed floor to lowest point on hatch, when in the raised position. HTH!

argonaut 06-30-2009 12:06 PM
Re: Need an easy measurement
 
Thanks. My estimate was about 40".
Looks like the verdict is that a motorcycle will not slide right in with the top on...


All times are GMT -4. The time now is 11:03 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com