The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   CST Emblem Question (https://67-72chevytrucks.com/vboard/showthread.php?t=350901)

Hammer500 06-30-2009 12:30 AM

CST Emblem Question
 
Maybe this has been asked before but I done a search and came up with nothing. I looked through the factory assmebly manual for the hole locations for the 69-70 CST fender emblem. I didn't find it in the manual, does it have the same locations as the c/10 emblem?

GruntMoanCough 06-30-2009 01:20 AM

Re: CST Emblem Question
 
Hello Hammer500! :hiya:

Doesn't that emblem go on the door, up near the belt line?

Werewolf 06-30-2009 04:34 AM

Re: CST Emblem Question
 
'67 and '68 have it up on the door. '69 and '70 have it in (roughly) the same location as the stock C/10 symbols on the fender. I'm not sure if they drilled separate holes for the actual CST/10 symbol or not, though.

special-K 06-30-2009 05:26 AM

Re: CST Emblem Question
 
Yes,it goes in the exact same holes as the C/10 & Custom/10 badges.Fender badge holes are all in the same place on the fender.

NYC-10 06-30-2009 07:12 AM

Re: CST Emblem Question
 
I just installed a cst/10 badge in the custom/10 location-no problem-just make sure your hole has clean edges because the mounting stud is right on the edge of the cst emblem

Hammer500 06-30-2009 07:29 AM

Re: CST Emblem Question
 
Thanks to all of you for the quick replies,

GruntMoanCough 06-30-2009 11:02 AM

Re: CST Emblem Question
 
1 Attachment(s)
I'm so confused...............

Hammer500 06-30-2009 11:05 AM

Re: CST Emblem Question
 
I think that may be for a blazer.


All times are GMT -4. The time now is 02:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com