![]() |
Cab for patch panals
3 Attachment(s)
OK my cab has got to go!!! I got a sawzall so if any of you guys need parts, let me know. The dash is in great shape, windshield pillars are solid, floor is very solid, would like to seel the floor whole if anyones interested. the only bad parts are the rockers cab corners and the whole passenger side of the backside of cab(buckled from a wreck I guess. under the back glass) if you guys need any more pics let me know
|
Re: Cab for patch panals
Price???
|
Re: Cab for patch panals
for the whole cab?? I was actually offering to cut out what you need and ship. This whole cab. . . Id say 150.00 but shipping would kill
|
Re: Cab for patch panals
Road trip!!! Well worth the price.
|
Re: Cab for patch panals
ttt
let me know what parts you guys need from this cab and ill throw you a price. |
Re: Cab for patch panals
1 Attachment(s)
I have attached a picture of the area. It is roughly 10" down from the top of the window and 15" in from the edge and all the way back to the seam towards the rear of the roof. Inside and outside, including the pillar. Shipping to 53154. Ground. Thanks
|
Re: Cab for patch panals
all that is solid on my truck and I can cut it out in the morning for you. 60.00 plus shipping. I would go greyhound. (but I can check fed ex too) is there a greyhound station around where you are?
|
Re: Cab for patch panals
ttt.
I'll be posting more and better pics of the cab tomorrow, and I found a little rust thru spots on the floor after all >( right where the floor meets the kick panal both sides. all else is good |
Re: Cab for patch panals
hey man what would be a price on the whole floor pan including rockers and cab corners my 67 needs it bad! and cant afford a new one i can get some of the dents out thats no biggie
|
Re: Cab for patch panals
oh and how about the doors the shiping would prolly be killer to NY 12941
|
Re: Cab for patch panals
doors are gone man. sorry. as for the cab. my rockers are gone as well, cab corners are rotted out, the flor pan is all very good except for the very front where it meets the kick panals. rust is about 2 inches out. also the cab supports should be replaced. Id go 100.00 for the whole floor plus shipping. station to station greyhound if theyll take it. just let me know how far up the firewall you need
|
Re: Cab for patch panals
3 Attachment(s)
My67c20: shipping would be about 23.00. let me know and Ill cut it out today after work
|
Re: Cab for patch panals
4 Attachment(s)
more pics of the cab Im putting up for parts. the black splotch under the pedals is just left over tar paper, the only rust is where you can see I punced thru with a screwdriver on the floor by the kick panal, this is there is even less rust on the passenger side by the kick panal.
|
Re: Cab for patch panals
How about the radio patch cluster with the ash tray? Looks like it is ok...can you get that out? have you seen these out before?how much would you want for it?
|
Re: Cab for patch panals
I actuall rather sell the whole dash. but I know shipping might be alot. Let me see what I can do and I`ll PM you tomorrow
|
Re: Cab for patch panals
PM'd you on the floor.
|
Re: Cab for patch panals
stiney: floor is available Ill look into greyhound for shipping
|
Re: Cab for patch panals
floor still aound 100.00 plus shipping
|
Re: Cab for patch panals
ttt
still have most of the cab and the dash, floors etc |
All times are GMT -4. The time now is 03:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com