late model seats?
 

I came across a ad for a blazer with what looks like late model chevy truck seats but the guy doesn`t know what they are from. Does anyone know of some good late model buckets with arm rests that will bolt in with minor mods and still retain the factory consol? here is a pic of the seats I found.

Re: late model seats?
 

Them seats are from the lat 90's GMT trucks.

Re: late model seats?
 

Thanks. Thats what I was thinking but I wasn`t sure if it was late 90`s or maybe a little newer. Do you know if they will bolt right in?

Re: late model seats?
 

I cannot say if they will bolt right in or not but.....I've seen so many people use them seats it's got to be an easy swap.

Re: late model seats?
 

You do have to make some new holes but it is easy. And they look like 95-99 seats.

Here is mine, I put 01-05 seats in.

Re: late model seats?
 

is there a big difference from the 95-99 seats and the 01-05 seats? Does the later console fit pretty easy? I`m not real partial to the original one so I don`t mind swapping it out. Does either year seats sit higher or lower? I`m happy with the height but could use something a little wider like the later seats.

Re: late model seats?
 

The biggest difference in them are the build in seat belts on the 01-05, and they sit close to the stock seats. The console fits like it was made for it.

Re: late model seats?
 

Im also going with this style seats. travis do you picks of the plate/bracket you made and mounting pics? Is it hard for passengers to get in the rear?

Re: late model seats?
 

I would have to dig out some pics, I know I have some. It's not bad, I did not get the full power so the seat will fold up easy. I just mad a plat 4x4 and weled a nut on the bottom of the floor.

Re: late model seats?
 

As Travis said, the first set of seats are indeed 95-99 GM seats. If you are putting them in a Blazer look for a set of 95 Extra cab seats. This was the year before the 3rd door, and the passenger side was flip-n-fold. One year only though...:(

Re: late model seats?
 

THESE ARE FROM A 92 BLAZER/ TAHOE 2DR. PASSENGER SIDE GOES FORWARD & ALMOST FLAT FOR EASY ACCESS TO THE REAR. JUST HAD TO MAKE NEW HOLES AND MADE SMALL BRACES FOR THE BOTTOM, FOR EXTRA SUPPORT.

http://i657.photobucket.com/albums/u...ember08370.jpg

Re: late model seats?
 

I had a 99 CK body ex-cab with a 60/40 style and I remember both flipping forward and it had the 3rd door. I`m keeping a eye out because I remember how comfy my old 99 seats were. My 90 blazer seats are nice but really kinda narrow. Doesn`t really bother me too much but it would be nice to have some wider seats. Plus it gives it a updated look.

Re: late model seats?
 

Thanks for the info on that. I like the way they look..

Re: late model seats?
 

No problem.

Re: late model seats?
 

Do you have any better pics of the 92 seats? I have a set of 77 low back seats, but the are "fixed". I would like the ability to fold them forward. It looks like those 92 seats are close enough that a 77 cover could be made to fit...;)

Re: late model seats?
 

I came across some 2001 or 2002 Tahoe buckets for $150. Whats the deal with the built in seat belt? Can they be removed so I can use my stock ones or can/should i use the built in ones and remove the stock ones?

Re: late model seats?
 

I would use the ones in the seats but, you would have to have the seat coverd if you take them out of the seats. And if you take them out of your blazer you will only have 3 small holes. So it's all about what you going for. Hope that helped you out and for $150 for new seats that is killer!:metal:

Re: late model seats?
 

My '96 ext. cab did not have the third door option and I had a seat that slid forward to allow access to the rear seat. However, the cable that released the seat to slide forward out of the way never lasted for more than a couple years at a time. Easy fix, but annoying. I don't believe the third door was ever a standard feature for the 88-98 trucks, so to find the correct passenger seat, just look for a truck that didn't have the third door option.