The 1947 - Present Chevrolet & GMC Truck Message Board Network - vendor for a 4" drop shackle & Hanger set

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - vendor for a 4" drop shackle & Hanger set (https://67-72chevytrucks.com/vboard/showthread.php?t=353558)

nlped

07-17-2009 01:53 PM

vendor for a 4" drop shackle & Hanger set

I was going to flip the rearend on my truck, but it is going to be to low for what I use the truck for. So, I'm trying to find a 4" shackle and hanger set to drop the rear of my '87 SWB GMC. Can anyone tell me who is a vendor who sells good kits at fair pricesThanks,

Ed

BTW...I have the flip brackets for my '87...they won't fit my '96 rearend that is going under the truck...Didn't think about the axle tube being larger diameter on the newer one...:confused:

bigarmzz

07-17-2009 03:11 PM

Re: vendor for a 4" drop shackle & Hanger set

Quote:

Originally Posted by nlped (Post 3417230)

i got all my lowering components from www.sporttruckdirect.com , you might try them, they sell the western chassis stuff, and its top notch in my opinion

Driveway Dreams

07-17-2009 03:34 PM

Re: vendor for a 4" drop shackle & Hanger set

You could always go the route that KeithSeymore introduced us too. Cut off your stock ones, move them up 2" or so and drill new holes, then bolt it in with grade 8 hardware. Then just get a 2" drop shackle to do the rest. Save some money and get the same effect.

96t/acj

07-17-2009 08:11 PM

Re: vendor for a 4" drop shackle & Hanger set

Now thats what im talking about i will be doing that for sure. -cancels order :)

All times are GMT -4. The time now is 11:51 AM.