The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - I need help (https://67-72chevytrucks.com/vboard/showthread.php?t=355951)

smith_84c10

08-02-2009 11:32 PM

I need help

Ok im kinda new at this.. I have an 84 c10 with a 350 that i would like to bore .30 or .60 if i do that do i need new rods and pistons or just pistons and use the same rods.. Please help and thanks in advance

texasfunk

08-03-2009 01:28 AM

Re: I need help

original rods can be used, i wouldn't recommend .60 over though unless its a strictly race motor, .30 or even .40 is fine, therefore, if you ever need to down the road, therefore you have some cuts left, andno worryabout overheating orpiston wallcracking/warpin

smith_84c10

08-03-2009 12:16 PM

Re: I need help

Thanks for the help

All times are GMT -4. The time now is 03:33 PM.