The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Tools, Shops and Shop Safety (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=89)
-   -   Please read---DUMB DUMB me (https://67-72chevytrucks.com/vboard/showthread.php?t=357907)

chip46wis 08-15-2009 10:45 AM

Please read---DUMB DUMB me
 
I will make this short as possible.I was installing my motor for the last time in my 69 step,I had 2 criss-crossed chains and grade 8 bolts with my 2 ton cherry picker> iwas lowering the motor and trans together and was very close to the mounts when I saw a wire in the way of the mount,SO not thinking I reached to grab the wire and SNAP one bolt snapped on the head and down came the motor on my middle fingers right hand,my fingers between the motor mount and frame mount,yes all the weight of both on these 2 fingers,as I screamed in the worst pain I ever experienced my wife came out and shoved a floor jack under the pan and raised it to where I got my severely smashed fingers out.A fast trip to ER (she drove) and I spent 2 hours there.Whatever they injected in the fingers gave relief in 30 seconds wow good stuff.A trip to a specialist yesterday said no surgery needed THANK YOU!!!! he said the fingers literally exploded and time will heal.6 weeks off work and possibly 1 year for total recovery.
SO BE SMARTER THAN I WAS.NEVER EVEN FOR 1 SECOND PUT YOUR HAND IN THIS POSITION.I am known for chewing guys out at work for not using jack stands ect.
A close look now shows the grade 8 bolt sheared,it was tight to the block and just a defective bolt apparently.:(

BillGent 08-15-2009 10:48 AM

Re: Please read---DUMB DUMB me
 
Ack! Glad it wasn't worse sir. Hope it mends quick!

chip46wis 08-15-2009 10:54 AM

Re: Please read---DUMB DUMB me
 
Thank you friend.

chip46wis 08-15-2009 10:56 AM

Re: Please read---DUMB DUMB me
 
I told my beautiful wife of 23 years that the Doctor said I need lots of se- from her and lots of Jose Cuervo tequila,she doesnt believe me!!!!!!!!

90\87Formula 08-15-2009 11:25 AM

Re: Please read---DUMB DUMB me
 
Quote:

Originally Posted by chip46wis (Post 3465808)
I told my beautiful wife of 23 years that the Doctor said I need lots of se- from her and lots of Jose Cuervo tequila,she doesnt believe me!!!!!!!!

Just tell her you added the tequilla part.:lol:

old Rusty C10 08-15-2009 12:00 PM

Re: Please read---DUMB DUMB me
 
well look at the bright side you still have the other hand to flip the bird at us when we make replies like this to you!!!
glad to hear it wasnt a whole lot worse .. it sure could have been and yeah safety is no accident!

project 67 sub 08-15-2009 01:44 PM

Re: Please read---DUMB DUMB me
 
all i got to say is ouch!

Stocker 08-15-2009 01:50 PM

Re: Please read---DUMB DUMB me
 
Yeeeouch!!! That hurt just reading about it! Too bad we sometimes have to injure ourselves in order to get smarter... but most of us have, myself included.

You're very lucky your wife was there, and knew what to do without panicking! Good luck getting her to believe that 'doctor's advice'! :lol:

Sillyoldman 08-15-2009 01:51 PM

Re: Please read---DUMB DUMB me
 
The description of the exploding finger is right on. I smashed one a few years ago. I described it as somebody steeping on a strawberry. It aint pretty and it will take time. Oddest thing for me was not having a fingernail.

big_al_71 08-15-2009 02:14 PM

Re: Please read---DUMB DUMB me
 
That just sent chills up my spine just by reading it hope you heal quickly

FRENCHBLUE72 08-15-2009 03:39 PM

Re: Please read---DUMB DUMB me
 
I also had a similar experience with a 454 th400 combo swing-in on a cherry picker with chains. I was pushing the picker in closer when somehow it flopped over when the bolt holding one of the chains busted. I was lucky but it scared the poop outta me and now I use a engine plate evrytime...

big mike71 08-15-2009 06:05 PM

Re: Please read---DUMB DUMB me
 
That made my fingers hurt.

buisy71 08-15-2009 06:15 PM

Re: Please read---DUMB DUMB me
 
hope your finger heal quick,good luck with the wife part.

fastwillie 696969 08-15-2009 07:33 PM

Re: Please read---DUMB DUMB me
 
did she at least put a block of wood on the jack before lifting on the oil pan ?

WorkinLonghorn 08-15-2009 07:59 PM

Re: Please read---DUMB DUMB me
 
I think I'd forgive her for a bent pan lol. My O.L.would have gone to pieces and would NEVER have figured out how to work a floor jack! Good thing you A) had your wife handy,B) she was handy.

In fact you MIGHT owe her big-time.
At least a nice dinner.

ERASER5 08-15-2009 09:41 PM

Re: Please read---DUMB DUMB me
 
Quote:

Originally Posted by chip46wis (Post 3465808)
I told my beautiful wife of 23 years that the Doctor said I need lots of se- from her and lots of Jose Cuervo tequila,she doesnt believe me!!!!!!!!

My wife would have asked me if I wanted another finger smashed. :lol:

rod86 08-16-2009 09:04 AM

Re: Please read---DUMB DUMB me
 
oww man, not cool... hope ur hand gets better soon... and if your wife wont help you out with the sx then i hope your ambidextrous... :D

bigbadjohn84 08-16-2009 12:52 PM

Re: Please read---DUMB DUMB me
 
geeze man. made me shiver thinking about it. I slammed my hand in a little Nissan truck door a few years ago. my little pinky nail hasnt been the same since. at least your had someone there to help. I had to open the door back on my own while bleeding like a stuck hog. :waah:

Heinz55 08-23-2009 12:53 PM

Re: Please read---DUMB DUMB me
 
Ouch! Hope it does not affect your hobby too much this next year.

I was working on putting the new engine in, messing with headers, etc, took break to look at situation, standing in front of truck discussing next move (thank God) and "TINK" chain I was using on engine picker broke. 454 dropped into engine compartment 3-4 inches, right where my hands had been 30 secs earlier. I turned white and went inside for a couple of hours.

Get well soon, its gotta suck

truckdude239 08-24-2009 04:09 PM

Re: Please read---DUMB DUMB me
 
My ex roomMate tried to caught my 305 ehenn the engine stand turned over and mashed. 3 of his fingures they have healed but they still aren't the right shape


All times are GMT -4. The time now is 03:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com