The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 99-06 GMT800 Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)
-   -   need help with hydorboost (https://67-72chevytrucks.com/vboard/showthread.php?t=357971)

Nima 08-15-2009 07:18 PM

need help with hydorboost
 
Hello:
I am replacing the hydroboost on my 05 silverado due to it's leakage. I need to reuse the pushrod, spring and spring retainer clip but I don't know how to get the reatainer clip out! Do I have to bend some of the pins around it? Is there any trick?
Thanks

Boog 08-15-2009 07:30 PM

Re: need help with hydorboost
 
Hi Nima. I'm not sure how that one is made but some of the older ones are throw aways meaning you just about have to tear them up to get them off and they are a dealer only item the last I heard. Maybe your luck will be better getting it off.

Nima 08-15-2009 07:50 PM

Re: need help with hydorboost
 
Thanks for input. Well, the little paper which came with the new one says I have to take them off and reuse them. I was thinking to go to dealer and get one but it is already after 5 pm sat!. If the s... instruction would say to get a new one, I wouldn't tear apart on Sat afternoon before buying one.

AirMale 08-20-2009 07:29 AM

Re: need help with hydorboost
 
push the spring retainer in and swivel it out diagonally. The retainer is very forgiving.


All times are GMT -4. The time now is 04:38 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com