The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - temp gauge (https://67-72chevytrucks.com/vboard/showthread.php?t=358610)

hare0714

08-19-2009 05:04 PM

temp gauge

i am trying to hook up a factory temprature gauge. right now i have an after market gauge that shows the temp in degree's. my question is this, what do i need to do to change it over ? i know i need to run a wire to the gauge but what do i put into the block to send the signal?

aerotruk63

08-19-2009 05:07 PM

Re: temp gauge

Stock temperature sending unit. It will have a single flat pole sticking out of it. The wire will run up to the stock gauge or idiot light.

hare0714

08-19-2009 06:10 PM

Re: temp gauge

i am starting to see my problem now, someone has cut the wire off going to the stock sensor.( along with a few others) i guess it's time for a new wiring harness.

All times are GMT -4. The time now is 06:00 AM.