has anyone added sway bars to thier 67-72?
 

I just added a new carb to my truck and it runs excellent. I am truly impressed by Performance Carburetors stage 3 carb. Its a 1000 cfm Holley Hp series with spring loaded needles and seats, manifold referenced power valve. I was struggling to get my 670 truck avenger to preform even with hours of tinkering. Now with the bigger carb the truck gets squirrely at wot. It has terrible body bounce. I am looking at Helliwig's sway bars for 67-72 k-10. Has anyone else added this to their rig. I have since stopped driving my truck because it is to tempting to stomp the throttle but it is hard to control the body rolling under acceleration.

Here is also the forumula for calculating cfm for a forced induction motor.

(CID x RPM) ÷ 3456} x {Boost ÷ 14.7) + 1} = CFM required.

431 x 5500=2370500/3456=685.908 x( 5/14.7=.476190+1)=919.2 cfm

http://www.performancecarburetors.com/index.php

http://www.hellwigproducts.com/vehicle_search

thanks

Re: has anyone added sway bars to thier 67-72?
 

Check this thread out...NU2-72 fabbed up a really nice one for his 4x4 and there is another link for one that BobbyK built.
http://67-72chevytrucks.com/vboard/s...d.php?t=286266