The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Comfy new seat! (https://67-72chevytrucks.com/vboard/showthread.php?t=364062)

Imperial Kustom 09-23-2009 02:50 PM

Comfy new seat!
 
I just finished putting an '88-'98 bench seat into the '63 today. Boy do I like how nice that is! Good fit, comfortable as all get out and easy to do! Just thought I'd share my excitement.

markeb01 09-23-2009 03:00 PM

Re: Comfy new seat!
 
Please post a pic when you get a chance.

Corts60 09-23-2009 07:57 PM

Re: Comfy new seat!
 
Hey, does the seat make you sit closer to the steering wheel? How about headroom?

GruntMoanCough 09-23-2009 08:53 PM

Re: Comfy new seat!
 
Looks nice in there. ;)

Imperial Kustom 09-24-2009 12:16 PM

Re: Comfy new seat!
 
Sorry guys, but I don't have photo software on my computer.

And Cort, I don't really notice too much of a difference between stock and this one, other than sitting just a hair higher.

Funny guy, Ron!!

astrochimp 09-24-2009 04:55 PM

Re: Comfy new seat!
 
Not sure if you can tell anything but here is a Photo of mine-
http://s185.photobucket.com/albums/x...urrent=012.jpg

It used original front mounting holes. Plenty of head room, wish there was more leg room, but I have the tank in cab still. I can measure (something) if anybody wants.

While grabbing the seat, grab the carpet behind it, it fits our trucks pretty well, just requires holes for the push clips.

David

GruntMoanCough 09-24-2009 07:03 PM

Re: Comfy new seat!
 
Quote:

Originally Posted by Imperial Kustom (Post 3533936)
Just thought I'd share my excitement.


If it looks anything like astrochimp's, then I'm excited too.... Looks good.

At least tell us what color yours is. :D

astrochimp 09-25-2009 08:38 AM

Re: Comfy new seat!
 
Forgot to add, I grabbed the seat belts from the truck also.

For the retractors I had to trim some plastic on the seat (hidden) side to make fit. made backing plates for the other points, IIRC 2" x3", for the shoulders you need to weld a nut to the plates, all easy install except drivers shoulder due to gas tank.

lakeroadster 09-25-2009 09:02 AM

Re: Comfy new seat!
 
1 Attachment(s)
Here is some data on '90's vintage seats:

The guy I bought my '65 from said it had a '91 Chevy truck bench seat in it. It has the small fold down arm rest in the middle. He had it recovered so other than the seat brackets it's hard to tell what vintage it is.

I am about 6'1, 180 pounds. The seat isn't too close to the steering wheel. Once I remove the tank from the cab I should gain a little bit more room, but not more than about an inch.

Here's a photo.

Imperial Kustom 10-13-2009 12:03 AM

Re: Comfy new seat!
 
It installed just as astrochimp said and it is a light tan. So it is very close to the interior Fawn paint.


All times are GMT -4. The time now is 10:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com