New Radio Turns On... But NO sound!
 

OKay, so I installed my new Ken Harrison radio. Didn't have to cut the dash, awesome. Anyways, for Constant power, I spliced into the cig lighter. The radio will turn on, but no sound. Checked speaker wire and all looked good. Checked fuses, all were good. ANY IDEAS??!?!?!

Re: New Radio Turns On... But NO sound!
 

nomad0231, I'm going to send you over to the audio forum where there are some guys that install them.
Good luck,
oldiron
forum staff

Re: New Radio Turns On... But NO sound!
 

Is there ANY noise, even static or a fuzzy sound?

Re: New Radio Turns On... But NO sound!
 

Make sure none of your speakers are blown. A blown speaker will show the radio a dead short and send the amp into protection.

Re: New Radio Turns On... But NO sound!
 

if you have a terminal that's fallen off a speaker it grounds the circuit out and you wont get any "noise" whatsoever...

good luck