The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   1976 windshield washer nozzles- location? (https://67-72chevytrucks.com/vboard/showthread.php?t=365749)

cowboy33713 10-05-2009 01:13 AM

1976 windshield washer nozzles- location?
 
Howdy-
Back in the fold w a '76 Stepside, purchased this summer.( Had to sell my '67 Stepside when we moved from FL to AZ ) Amazingly , not beaten up. Was missing a couple of small items- windshield washer nozzles for instance. Made my order through LMC ( did a big cooling system rehab this week) but can't see any screw holes for mounting the new nozzles. Pics would be greatly appreciated if anyone could post up. Thanks!

79gmcc15 10-05-2009 03:32 AM

Re: 1976 windshield washer nozzles- location?
 
I'll see if I can get some of my 79 tomorrow.

cowboy33713 10-05-2009 01:19 PM

Re: 1976 windshield washer nozzles- location?
 
Thanks, 79. Really need the help- amazingly, there is no detail on this in the factory manual reprints I have
cowboy33713

Keith Seymore 10-05-2009 01:38 PM

Re: 1976 windshield washer nozzles- location?
 
Quote:

Originally Posted by cowboy33713 (Post 3553116)
Thanks, 79. Really need the help- amazingly, there is no detail on this in the factory manual reprints I have
cowboy33713

Are you referring to the "PAD" sheets (the assembly documents, sometimes now called the PDMs)?

That would be a surprise, because they should highlight not only the installation but the adjustment procedure, too (ie, where they should hit on the windshield and stuff).

At any rate, they should attach in the area of the cowl openings, at the rear of the hood, sticking through one of the openings (one toward the driver's side, one toward the passenger side).

K

cowboy33713 10-05-2009 02:00 PM

Re: 1976 windshield washer nozzles- location?
 
Howdy- No don't have PAD sheets. Hood may be a replacement. No holes anywhere that would be obvious as mounting points,either on hood or cowl area, which is why I requested pics, if possible.

79gmcc15 10-05-2009 08:43 PM

Re: 1976 windshield washer nozzles- location?
 
hey, sorry I almost forgot. and daylight sucked. sorry for the quality of the pics.
Driver Side: which is 19 vents from the right to left
http://i333.photobucket.com/albums/m...4/Image473.jpg

http://i333.photobucket.com/albums/m...4/Image472.jpg

http://i333.photobucket.com/albums/m...4/Image468.jpg

Passenger Side:which is 20 Left to right.
http://i333.photobucket.com/albums/m...4/Image471.jpg
http://i333.photobucket.com/albums/m...4/Image465.jpg
http://i333.photobucket.com/albums/m...4/Image466.jpg

Let me know if you need a better pic of something or whatever.

Justins76 10-05-2009 09:43 PM

Re: 1976 windshield washer nozzles- location?
 
Those pics above are where they are on my 76 hood.

cowboy33713 10-06-2009 03:05 AM

Re: 1976 windshield washer nozzles- location?
 
Justins76 and gmcc15-
THANKS! Just what I needed to get that little project underway. Can get it done right, now.
Thanks again, and Best Regards,
coyboy33713

79gmcc15 10-06-2009 03:23 AM

Re: 1976 windshield washer nozzles- location?
 
hey, NP that's what were here for. Best of luck!

Keith Seymore 10-08-2009 02:08 PM

Re: 1976 windshield washer nozzles- location?
 
Related topic:

I was having conversation on a Pontiac board about the PAD sheets and here's the one they showed as an example:

http://i23.photobucket.com/albums/b3...001/img168.jpg

( the one on the windshield washer installation and adjustment - LOL).

Incidently, when I worked in the plant they would sometimes "accidently" get mis adjusted so that they would spray the workers and vehicle behind it....

K


All times are GMT -4. The time now is 07:34 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com