Wtd: LS Ignition
 

I am looking for an LS2, LS3, or LS7 coil ignition setup, with bracket, misc hardware, wire harness, and plug wires. The truck coils have a visible external aluminum heat sink near the connector. Thanks.

This GM heat sink coil was used on:
Cadillac Escalade 2002-2009
Yukon 2000-2009
Chevy Silverado 1999-2009
Trail Blazer 2001-2009
Hummers ? - ?

Gene
605 & 721 & 5545 ( please remove the &'s, helps reduce the automated marketing phone calls)
or email

Re: Wtd: LS Ignition
 

Not all truck coils were Delco. they also have a mitsubishi coil too. LS1 are different than LS7 etc. my 04 5.3 has mitsu coils on it

Re: Wtd: LS Ignition
 

Good point. I think the other types are Wells C1251, Standard UF262, and GM/Daewoo 190005218. I'd just be happy to get whole setup without breaking the bank..... Delco or other.....

Re: Wtd: LS Ignition
 

I have a delco set good condition with plug wires,bracket,harness $200.
and a set of Mitsu coils no plug wires that are banged up for $100 (2 coils are broke) i have a coil that has cosmetic damage i will throw in so you will only got to buy one.

Re: Wtd: LS Ignition
 

Can you tell me what year and vehicle they came from? Also, how difficult would it be to get a picture or two? Thanks!

Re: Wtd: LS Ignition
 

The delcos are 2002 chevy truck. the mitsus are 2004 chevy truck both 5.3L
ill take some pics tomorrow (there at the shop)

Re: Wtd: LS Ignition
 

delcos

Re: Wtd: LS Ignition
 

Mitsu

Re: Wtd: LS Ignition
 

I'd buy the 2002 set... if you had part of the engine harness that connects to the coil harness. Please tell me you do. Thanks!

Re: Wtd: LS Ignition
 

I have two complete harnesses. but im not going to cut them up. if you want to buy one let me know.